Shop
micro S Dark
Intelligently disguised The micro S Dark belongs to the compressed version "S" of the famous Kellermann micro 1000® series.In the new format, the micro S Dark reflects the strong trend towards even more compressed lights and opens up new design possibilities for motorcycles. Due to the drastic size reduction and the strongly tinted indicator’s glass, the "indicator" component disappears almost completely.In action however the high performance LEDs provide a spectacularly bright light, which Kellermann indicators are now for! The well-known Kellermann HighPower LED Technology** and the new EXtranz®- Extreme Optical Transparency Technology enable an optimized light channeling. As the complete electronics of the micro S Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* Combined at front and back the offer a perfect look. Suitable for all motorcycle models.** Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Strongly tinted glass – spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5 x 0,5 x 6,5 mm thread European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Rhombus Extreme
Taking Extreme to the next level The Rhombus Extreme is an absolute eye-catcher! Not only does it boast a sensational design, but also the new Extreme model is one of the brightest Kellermann indicators available. Never before has there been such versatility allowing use on multiple applications including quads, cars and trailers (homologated according to ECE-R6). The Rhombus Extreme can be installed within 20 mm to the main headlamp. Kellermann HighPower LED Technology** uses two LEDs producing an extraordinarily bright indicator. Due to this greater illumination it is recognized much more quickly in traffic providing for maximum road safety*. * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear Applicable on all vehicles (e. g. motorcycles, quads, cars, Super Seven, trailers, etc.) Extreme light power Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 thread Replaceable flexible rubber adapter protects the indicator from vibration damage and vandalism
Rhombus Extreme
Taking Extreme to the next level The Rhombus Extreme is an absolute eye-catcher! Not only does it boast a sensational design, but also the new Extreme model is one of the brightest Kellermann indicators available. Never before has there been such versatility allowing use on multiple applications including quads, cars and trailers (homologated according to ECE-R6). The Rhombus Extreme can be installed within 20 mm to the main headlamp. Kellermann HighPower LED Technology** uses two LEDs producing an extraordinarily bright indicator. Due to this greater illumination it is recognized much more quickly in traffic providing for maximum road safety*. * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rearApplicable on all vehicles (e. g. motorcycles, quads, cars, Super Seven, trailers, etc.) Extreme light power Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 thread Replaceable flexible rubber adapter protects the indicator from vibration damage and vandalism
Rhombus S
Corners and edges The Rhombus stands for recognizable, striking design. Its distinct shape creates a unique style. Supplied in a stylish metal housing, the Rhombus has a very wide light beam. An almost unlimited lifespan is guaranteed with our specially control technology**. The Rhombus replaces the front as well as the rear indicators and gives a new look. Suitable for all motorcycle models*.* Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Improved safety because of the brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Rhombus S
Corners and edges The Rhombus stands for recognizable, striking design. Its distinct shape creates a unique style. Supplied in a stylish metal housing, the Rhombus has a very wide light beam. An almost unlimited lifespan is guaranteed with our specially control technology**. The Rhombus replaces the front as well as the rear indicators and gives a new look. Suitable for all motorcycle models*.* Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Improved safety because of the brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Rhombus S
Corners and edges The Rhombus stands for recognizable, striking design. Its distinct shape creates a unique style. Supplied in a stylish metal housing, the Rhombus has a very wide light beam. An almost unlimited lifespan is guaranteed with our specially control technology**. The Rhombus replaces the front as well as the rear indicators and gives a new look. Suitable for all motorcycle models*.* Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Improved safety because of the brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Rhombus S
Corners and edges The Rhombus stands for recognizable, striking design. Its distinct shape creates a unique style. Supplied in a stylish metal housing, the Rhombus has a very wide light beam. An almost unlimited lifespan is guaranteed with our specially control technology**. The Rhombus replaces the front as well as the rear indicators and gives a new look. Suitable for all motorcycle models*.* Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Improved safety because of the brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Rhombus S DF Dark
A talented edge Our innovative indicator-brake-rear light combination maximizes your individual styling option at the rear of your bike! Optically fully disguised due to its reduction in size and an all-rounder at the same time: The original tail light can be eliminated and replaced by beaming double rear lights based on high-performance LEDs and the Kellermann HighPower LED Technology.** Inconspicuous at rest, unbeatable in action: The brake light of the Rhombus S DF Dark warns with an intensity that is second to none. It keeps the following traffic at distance, thus enhancing safety on the road. As the complete electronics are in the casing the Rhombus S DF Dark allows for a significant reduction in weight. Suitable for all motorcycle models.* * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5 x 0,5 x 6,5 mm thread European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Rhombus S DF Dark
A talented edge Our innovative indicator-brake-rear light combination maximizes your individual styling option at the rear of your bike! Optically fully disguised due to its reduction in size and an all-rounder at the same time: The original tail light can be eliminated and replaced by beaming double rear lights based on high-performance LEDs and the Kellermann HighPower LED Technology.** Inconspicuous at rest, unbeatable in action: The brake light of the Rhombus S DF Dark warns with an intensity that is second to none. It keeps the following traffic at distance, thus enhancing safety on the road. As the complete electronics are in the casing the Rhombus S DF Dark allows for a significant reduction in weight. Suitable for all motorcycle models.* * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5 x 0,5 x 6,5 mm thread European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
License Plate Light KL 1
Small, compact, legal The KL 1 license plate light with its micro size and unique design is a cool addition to any motorcycle. Thanks to its specially developed optics, the license plate can be lit completely by pure white (CRI>80)* light. In its high quality metal housing, the KL 1 can be fixed using the accompanying mounting strips to the license plate bracket or also directly onto the license plate itself. Instead of the accompanying bracket, the user’s own bracket can also be used. A tab sized 6x7x3 cm (LxWxH) is required. Suitable for all motorcycle models. *CRI - color rendering index ECE-tested Compact micro size Pure white light (CRI>80)* High quality metal housing Suitable for 12 volt DC applications
Silent rubber adapter KH 1000
Silent rubber adapter KH 1000 Spare part for KH 1000 Length: 10 mm, with M8 thread
License plate illumination
License plate illumination Spare parts for KH 1000 series Height: 29 mm Breadth: 54 mm Height: 46 mm
Reflector 90x30 mm
Reflektor for KH 1000 Spare parts Measure: 90 x 30 mm, with M5 thread bolt
Adapter for other indicators M 10
Adapter for other indicators Sapre parts for KH 1000 With M10 threaded
Reflektor 100 x 13 mm
Reflector for KH 2000 Measure: 100 x 13 mm with M5 thread bolt
Reflektor 123 x 12,5 mm
Reflector 123 x 12,5 mm Measure: 123 x 12,5 mm with M5 thread bolt
License plate light W5W (lamp)
License plate light Spare parts for KH 1000, W5W (lamp), E1 license ECE-tested
Bullet 1000® DF
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. Bullet 1000 DF The Bullet 1000® DF is a rear indicator in combination with a rear and brake light function. It replaces the existing indicators, brake and rear light. The light of the continuously glowing red rings give the tail of the motorcycle a spectacular look**. When breaking, the light circle of the brake light shines strong and clear, the clear message to the following traffic is: Keep your distance. The Bullet 1000® DF at the tail and the Bullet 1000® PL, Bullet 1000® PL white or Bullet 1000® Extreme in the front are the perfect combination for your motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
Bullet 1000® DF
Classic meets Hightech The Bullet 1000® RB combines and replaces the original rear and brake lights at the tail of the motorcycle. The high quality metal housing fits any demanding bike style like a jewel. The homogenous circular red rear light ring adds a spectacular appearance. The radiant brake light keeps the following traffic at distance, thus ensuring more safety on the road. In addition to the proven Kellermann HighPower LED Technology** the specially for this series developed Kellermann HPT® light technology ensures a homogeneous circular beam, bringing the overall impression of the product to perfection.* Available in chrome or black the Bullet 1000® RB can be combined with other indicator series e.g. Bullet 1000® or the miniature Atto® series. * Elekctronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing rear/brake light Unique and homogeneous light ring with a tinted glass HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
Bullet 1000® Adapter HD
Bullet Adapter HD After the Bullet 1000 series enjoys great popularity, many Harley riders wish to replace their original turn signals against the Bullet 1000 and thereby continue to use the front fasteners on the handlebars. To allow for unobtrusive cable routing, the adapter is a two-piece design that screws between the original handlebar mounts and the Bullet 1000. For the assembly between Bullet 1000 and the Bullet 1000 Adapter HD it is necessary to dismantle the original foot of the turn signal. Attention, do not damage the cables during disassembly! The original foot is screwed onto the turn signal body with a regular metric right-hand thread. two-piece design inconspicuous cable routing
Bullet 1000® Adapter HD
Bullet Adapter HD After the Bullet 1000 series enjoys great popularity, many Harley riders wish to replace their original turn signals against the Bullet 1000 and thereby continue to use the front fasteners on the handlebars. To allow for unobtrusive cable routing, the adapter is a two-piece design that screws between the original handlebar mounts and the Bullet 1000. For the assembly between Bullet 1000 and the Bullet 1000 Adapter HD it is necessary to dismantle the original foot of the turn signal. Attention, do not damage the cables during disassembly! The original foot is screwed onto the turn signal body with a regular metric right-hand thread. two-piece design inconspicuous cable routing
Rigid mounting M8 x 40 HD
Rigid Mounting Spare parts for micro and Rhombus series M8 x 40
Rigid mounting M8 x 40 HD
Rigid Mounting Spare parts for micro and Rhombus series M8 x 40