Rhombus S Extreme
€64.95
Available, delivery time: 1-3 days
Product information "Rhombus S Extreme"
A brilliant edge
The Rhombus S Extreme is one of the brightest Kellermann indicators available so far. In combination with a drastic reduction in size new design standards are set – not only for motorcycles! The Rhombus S Extreme is allowed for use on multiple applications including quads, cars and trailers (homologated according to ECE-R6). On motorcycles this indicator can be installed within twenty millimetres of the main headlamp, thus blending seamlessly into the visual appearance of the bike.
Three LEDs and the Kellermann HighPower LED Technology** generate an impressive and previously unattained bright signal. Due to this greater illumination power it is recognized more quickly in traffic providing for maximum road safety.*
* Electronical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.
ECE-tested for front and rear
Applicable on all vehicles
(e. g. motorcycles, quads, cars, Super Seven, trailers, etc.)
- Extreme light power and brilliant optic
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- High quality metal housing
- Suitable for 12 volt DC applications
- With M5 x 0,5 x 6,5 mm thread
- European design protection
Please note the extensive electronic equiment
https://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
| Casing: | black |
|---|---|
| DC on-board power supply: | 12 V |
| ECE-type approval: | all vehicles |
| Functional features: | Indicator |
| Height: | 11,5 mm |
| Length (without thread/fastening): | 35 mm |
| Lens colour: | clear |
| Mounting: | mounted indicator |
| Mounting thread: | M5 x 0,5 x 6,5 mm |
| Position: | front left & rear right |
| Produktlisting-Features: | Indicator |
| Technology: | LED |
| Wide: | 11,5 mm |
Montagezubehör
Bulb holder evo for micro 1000® Halogen (from 2004)
Flexible Rubber Adapter Spare parts for micro and Rhombus series M8 x 20
Mounting Plates 123.753 used for:Italian Motorcycles (Ducati, Moto Guzzi, usw.)
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
Adapter Spare parts for micro and Rhombus series Measure: M8 - M12
Elektronisches Zubehör
Micro relay for the pros The R 1 flasher relay has very small dimensions and flashes independently of load at a steady 75 pulses per minute. It also has a connection available for the flasher dashboard light. It is easily installed into the feed to the indicator switch, or can be swapped with the original 2-3 pole flasher relay. It is therefore suitable for all motorcycles with indicator switches. Should the change to LED indicators result in the non-intentionally activated indicators also flashing; then the indicator control light must also be connected to the R 1 relay. The ‘hazard warning’ effect will then be effectively All necessary components required for installation are included. ECE-tested Simple installation in feed to the indicator switch or swap the original 2-3 pole flasher relay Connection to indicator control light also possible Restricts the accompanying flashing of non-activated indicators Load-independent / steady flash rate Switching capacity 0-50W by 12V/ 0-24W by 6V Very small dimensions 22 x12 x 6 mm (L/W/H) Suitable for indicator switches Suitable for 6 and 12 volt DC applications
i.BOS - CL1 Serves as a quick fix for inaccurate cockpit displays The i.BOS systems (intelligent boxing operation system) provide a quick fix, if after the installation of the indicator the control light flashes too quick or other control lights in the cockpit function inaccurately. i.BOS - CL1 provides correct function of the control and hazard light, e.g. when using DF versions for Harley Davidson models with HD-LAN. *Additionally and on case by case the option "LED indicator" has to be activated in the software. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, break light)
i.BOS - EL1 Serves as a quick fix for inaccurate cockpit displays The i.BOS systems (intelligent boxing operation system) provide a quick fix, if after the installation of the indicator the control light flashes too quick or other control lights in the cockpit function inaccurately. i.BOS - EL1 provides correct function of the hazard light, e.g. when using DF versions. *Additionally and on case by case the option "LED indicator" has to be activated in the software. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, light)
i.SED V12 suitable for vehicles with 12 volt indicator application For example when mounting indicators with higher wattage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual „DF“ products on vehicles where the indicators ground is switched but not the plus as usual
i.SED V6 suitable for vehicles with 5-9 volt indicator application For example when mounting indicators with higher wattage than original indicators with higher voltage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual
Posi-Lock cable connector splash water connections. The cable is connection between seconds, without soldering.
Content: 9 Piece(s) (€1.44 / 1 Piece(s))
Posi-Lock cable connector MINI Splash water connections The cable is connection between seconds, without soldering
Content: 5 Piece(s) (€1.99 / 1 Piece(s))