Being seen is no coincidence.
More visibility through exceptionally bright, road-legal daytime running lights.
 |
Dayron® Daytime running light and position light per light €149,95 |
 |
Dayron® i Daytime running light, position light and indicator per light €199,95 |
Dayron® Daytime Running Light & Position Light
Daytime running light – two Dayron® light up at the legal maximum brightness, the low beam is switched off.
Position light – the daytime running light switches to position light as soon as the low beam is activated.
Under Section 17 (2a) of the German Road Traffic Regulations (StVO), daytime running lights may be used
instead of the low beam during the day. The position light (marker light) shines parallel to the low beam.
|
MANUAL SWITCHING Dayron® Daytime Running Light & Position Light With installation kit, for motorcycles without a factory daytime running light. Available with or without indicator. View Dayron® and Dayron® i |
AUTOMATIC SWITCHING Dayron® Daytime Running Light & Position Light With a vehicle-specific technic set. A light sensor handles the switching. Available for three models. Available for these models BMW R nineT BMW R 1250 GS / Adventure Harley-Davidson Pan America / Special |
NO SWITCHING Dayron® Position Light Pure position light. Shines permanently alongside the low beam, without a switch and without electronics. Available with or without indicator. View Dayron® WL and PL |
Dayron® daytime running lights in comparison
Permitted number: one light in the centre or two lights symmetrically to the centre line of the vehicle
ermitted brightness: 400 – 1,200 candela per light
Dayron® daytime running lights:
- Two lights — each at the legal maximum brightness
- Maximum visibility during the day
- Maximum awareness in oncoming traffic
Standard daytime running lights:
- Usually one central light — just above the minimum brightness
- Good visibility during the day
- Average awareness in traffic
Auxiliary / fog lights:
- Only permitted for visibility range below 50 metres
- Improved view in fog
- Illumination flat across the road
|
Function variants
|
Light variants
|
Dayron® Daytime Running Light
Available with or without indicator, in cold white and warm white.
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
Dayron® WL All you need to know: Powerful addition to the low beam, day and night, for even more safety!The Dayron ® WL is used together with the low beam and can be operated both during the day and at night. This significantly increases the motorbike's light image. Together with the highest light output of all ECE-approved position lights on the market, the Dayron® WL ensures significantly greater visibility of the motorbike and thus reduces the risk of accidents.If there is no sufficiently fused ignition plus for connecting the Dayron WL, you can use our i.SED Performance .ECE approved for frontExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing low beamCan be operated during the day and at nightFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design
Dayron® WL All you need to know: Powerful addition to the low beam, day and night, for even more safety!The Dayron ® WL is used together with the low beam and can be operated both during the day and at night. This significantly increases the motorbike's light image. Together with the highest light output of all ECE-approved position lights on the market, the Dayron® WL ensures significantly greater visibility of the motorbike and thus reduces the risk of accidents.If there is no sufficiently fused ignition plus for connecting the Dayron WL, you can use our i.SED Performance .ECE approved for frontExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing low beamCan be operated during the day and at nightFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design
Dayron® PL Powerful addition to the low beam, day and night, for even more safety! The Kellermann Dayron® PL is now available as a position light with flashing function.The Dayron® PL is used together with the low beam and can be operated both during the day and at night. This significantly increases the motorbike's light image. Together with the highest light output of all ECE-approved position lights on the market, the Dayron® WL ensures significantly greater visibility of the motorbike and thus reduces the risk of accidents.If there is no sufficiently fused ignition plus for connecting the Dayron PL, you can use our i.SED Performance ..ECE approvedExtreme light output - more safety through greater visibilityUnique, brilliant light surface with striking new lens technologySupplements the existing low beamCan be operated during the day and at nightKellermann HighPower LED technologyLonglife Protection Guard®, IC controlled, 330kHz clockedFlow-optimised aluminium housingSuitable for 12 volt DC vehicle electrical systemsWith M8 x 20 mm mounting threadEurope-wide protected design
Dayron® PL Powerful addition to the low beam, day and night, for even more safety! The Kellermann Dayron® PL is now available as a position light with flashing function.The Dayron® PL is used together with the low beam and can be operated both during the day and at night. This significantly increases the motorbike's light image. Together with the highest light output of all ECE-approved position lights on the market, the Dayron® WL ensures significantly greater visibility of the motorbike and thus reduces the risk of accidents.If there is no sufficiently fused ignition plus for connecting the Dayron PL, you can use our i.SED Performance ..ECE approvedExtreme light output - more safety through greater visibilityUnique, brilliant light surface with striking new lens technologySupplements the existing low beamCan be operated during the day and at nightKellermann HighPower LED technologyLonglife Protection Guard®, IC controlled, 330kHz clockedFlow-optimised aluminium housingSuitable for 12 volt DC vehicle electrical systemsWith M8 x 20 mm mounting threadEurope-wide protected design
Universalanschlussset für die Dayron® Tagfahrlichtserie an Motorrädern mit H4 Singlescheinwerfer ohne vorhandenen Lichtschalter.
The days are getting shorter.
Low sun, early dusk, wet roads. This is exactly when it is decided how soon a motorcycle is seen.