Shop
Mounting Plates for Yamaha ISY2
Mounting Plates 123.757 used for:YamahaFZ6 Fazer '04 front/rearYZF R6 '03 front/rearTDM 900 '02 front/rearYZF R1 '02 front/rear
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
Atto® WL
The "White" Light The Atto® WL/WL Dark is the new kid on the block of the highly successful Atto® family and at once the first single position light from Kellermann. The Atto® already defined a completely new category of indicators: sensationally small and spectacularly bright. Compact and illuminating power: With this combination the Atto® WL is a real sensation! The light surface of the Atto® WL/WL Dark would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto®WL basically disappears on the motorcycle. The position light shines with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. The Atto® WL offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! Therefore the Atto® WL is enhancing safety on the road. ECE-tested for front EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Dayron® Classic, M8 Adapter
Dayron® WL All you need to know: Powerful addition to the low beam, day and night, for even more safety!The Dayron ® WL is used together with the low beam and can be operated both during the day and at night. This significantly increases the motorbike's light image. Together with the highest light output of all ECE-approved position lights on the market, the Dayron® WL ensures significantly greater visibility of the motorbike and thus reduces the risk of accidents.If there is no sufficiently fused ignition plus for connecting the Dayron WL, you can use our i.SED Performance .ECE approved for frontExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing low beamCan be operated during the day and at nightFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design
Dayron® Innovation, U Adapter
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
i.NEX - Connector set 190
i.NEX - Connector set 190Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (front indicators)
BMW S 1000 RR Atto® DF Set
BMW S 1000 RR Atto® DF Set(for original 3-in-1 rear lights)Complete set with all necessary parts for mounting and electrical connection of Atto® DF rear on a BMW BMW S 1000 RR .Contents:2x156.200 Atto® DF / piece 99.95€1x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.522 i.NEX - Connector set 122 / set 12.95€
Harley-Davidson FLSS 1802 SOFTAIL SLIM S ab MJ 2016 Atto® DF Set
BMW S 1000 RR Atto® DF Set(for original 3-in-1 rear lights)Complete set with all necessary parts for mounting and electrical connection of Atto® DF rear on a BMW BMW S 1000 RR .Contents:2x156.200 Atto® DF / piece 99.95€1x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.522 i.NEX - Connector set 122 / set 12.95€
Aprilia Tuono V4 1100 Factory MJ 2017 -2022 Heck 2 X Atto® Set
Aprilia Tuono V4 1100 Factory MJ 2017 -2019 Rear 2 X Atto® SetComplete set with all necessary parts for mounting and electrical connection of Atto® at the rear of a Aprilia Tuono V4 1100 Factory MJ 2017 -2019.Contents:2x152.200 Atto® / piece 64.95€1x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.511 i.NEX - Connector set 111 / set 12.95€
Aprilia Tuono V4 1100 Factory MJ 2017 -2022 Front 2 X Atto® Set
Aprilia Tuono V4 1100 Factory MJ 2017 -2019 Front 2 X Atto® SetComplete set with all necessary parts for mounting and electrical connection of Atto® at the frontof a Aprilia Tuono V4 1100 Factory MJ 2017 -2019.Contents:2x152.200 Atto® / piece 64.95€1x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.510 i.NEX - Connector set 110 / set 14.95€
Mounting Plates for Suzuki
Mounting Plates 123.750 used for:Universal Adapterplate for all Suzuki Motorcycles front/rear
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
Yamaha XSR 700 2022 4 x Atto® Set
Honda VFR 800X Crossrunner MJ 2018 4 X Atto® SetComplete set with all necessary parts for mounting and electrical connection of Atto® at the front and rear of a Honda VFR 800X Crossrunner MJ 2018.Contents:4x152.200 Atto® / piece 64.95€2x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€2x111.544 i.NEX - Connector set 144 / set 14.95€
Atto® RB hm
’Seeing red’ right to the point! The Atto® RB is another kid on the block of the highly successful Atto® family and probably the world’s smallest street legalrear and brake light for motorcycles. The Atto®/Atto® Dark already defined a completely new category of indicators: sensationally small and spectacularly bright. The new rear and brake light Atto® RB will be no different, but due to its dual function will take things even further. The light surface of the Atto® RB would fit four times on a 1 Cent coin! Therefore the tail of a bike can get a complete clean look and feel. This rear and brake light will only grab your attention when it really has to! The brake light of the Atto® RB warns with an intensity that is second to none. It keeps the following traffic at distance.Therefore the Atto® RB is enhancing safety on the road. The Atto® RB can be installed in different ways and offers more options to individualize a bike. It can be mounted in pairs orcentrally as a single light! The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks tothe use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparencytechnology. The complete electronics of the Atto® RB are in the casing, this rear and brake light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear horizontal mounting sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
i.NEX - Connector set 121
i.NEX - Connector set 121Vehicle-specific plug & play set for connecting the i.NEX consisting of three adapter cables. The set is suitable for the following motocycle models: BMW R nine T 2018 (rear 3in1 lights)
i.NEX - Connector set 110
i.NEX - Connector set 110 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Aprilia Tuono V4 1100 Factory MJ 2017 -2019 (front indicators)
i.BOS - EL 33
i.BOS - EL 33 The i.BOS systems provide a quick fix, if after the installation of DF versions control lights in the cockpit function inaccurately. When changing the original indicators to LED or Halogen the indicating frequency is automatically altered. This is adjusted for parallel switched power resistors. The right selection of the suitable power resistors is listed in the table below. If you are not sure which resistor you need, please don’t hesitate to contact us via the contact form (Technical Dept) on our homepage. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, brake light) One i.BOS - EL 33 parallel to the rear light and one i.LOAD - IL 7,5 parallel to the brake light are needed.
Technikset i - BMW R 1250 GS MY18-23 - LED 4-polig M8-Adapter
Technikset i - BMW R 1250 GS MY18-23 - LED 4-polig M8-Adapterfür alle Dayron® I (mit Blinker)
i.NEX - Connector set 110
i.NEX - Connector set 110 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Aprilia Tuono V4 1100 Factory MJ 2017 -2019 (front indicators)
Mounting Plates for Suzuki ISS1
Mounting Plates 123.751 used for:SuzukiSuzuki DRZ 400SM Dual Purpose '05 front/rearGSX R 600/750 '98-00 rearGSX R 600/750/100 '02 front/rearSV 650/1000 '03 front/rearGSF 600 Bandit '00-04 front/rearGSF 650 '05 front/rearGSF 1200 Bandit '01 front/rear
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
i.NEX - V8 Die elektronische Universallösung für Motorradleuchten mit 5 - 9V!
Kellermann i.NEX: One for all! All indicators, all motorcyclesNo more conversion stress - i.NEX is the all-rounderThe Kellermann i.NEX now makes converting motorcycle lights as easy as possible.Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.When things need to be simple - the i.NEX puts an end to the despair of the mechanic and incalculable hours of work in the workshop! Motorcycle electronics are becoming more complex every year, making the installation of retrofittable lights increasingly time-consuming and nerve-wracking. It is often not clear which accessories are required for the conversion or what problems can arise during the conversion. The solution: Kellermann i.NEX - the box that can do everything!The i. NEX can be used to connect up to four indicators as well as a rear light, brake light and position light. The i.NEX series also offers connection accessories with matching connector and cable sets. This makes conversion simple and effective.Small effort, big effect - the lights are connected directly to the i. NEX. The i.NEX is set according to the requirements of the on-board electronics using rotary switches. No matter which light, no matter which motorcycle - only the Kellermann i.NEX can do it!Kellermann i.NEX - Always the right choice - error messages in the cockpit, incorrect flashing frequency of indicators and indicator control lights as well as disturbing idle currents are now a thing of the past.In addition, the i.NEX series offers the solution for various requirements, e.g. when fitting indicators with higher power consumption or higher voltage than original as well as original minus-switched indicators.Kellermann i.NEX - Complicated becomes simple!i. NEX at a glance:Electronic universal solution for motorcycle lights such as indicators, rear/brake light and position lightCompatible with classic bikes, new models and modern operating systemsCorrect flashing frequencyNo error messages in the cockpitNo disruptive quiescent currentsInstallation of indicators with higher power consumption [watts] than originalInstallation of indicators with lower power consumption [watts] than originalInstallation on motorcycles with minus-switched indicatorsTechnical information: The i.NEX - V8 is suitable for standard 5-9 volt lights up to 10 watts total power of the functions to be replacedCalculation: Constant lights: Full power / indicators: Half power Example: Tail light 1W + brake light 3W + indicator 3W (1.5W) + indicator 3W (1.5W) = 7W up to 20 watts total power of the functions to be replaced an i.NEX - AddOn 10 is also requiredExample: Tail light 3W + brake light 3W + indicator 10W (5W) + indicator 10W (5W) = 16W The volts and watts are specified on the lenses of the standard lights. A different product is required in the following cases: 21 watt indicators i.LOAD - IL 7,5 – one piece per indicatorAlternatively: If a manual 2-3 pole indicator relay is fitted to the vehicle as standard (optional) Blinkrelais R1 – one piece per vehicle Blinkrelais R2 – one piece per vehicle 12 Volt lights / on-board voltage 12 Volt i.NEX - V12 3-4 Volt lights / on-board voltage 12 Volti.NEX - V4 A customized solution is required in the following cases: Email to customer service Main headlights, daytime running lights, fog lights US vehicles >12 Volt on-board voltage
micro Rhombus
Corners and edges The Rhombus stands for recognizable, striking design. Its distinct shape creates a unique style. Supplied in a stylish metal housing, the Rhombus has a very wide light beam. An almost unlimited lifespan is guaranteed with our specially control technology**. The Rhombus replaces the front as well as the rear indicators and gives a new look. Suitable for all motorcycle models*. * Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear Improved safety because of the brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
BMW S 1000 R 4 x Atto® Set
BMW S 1000 R Atto® SetComplete set with all necessary parts for mounting and electrical connection of Atto® at the front and rear of a BMW BMW S 1000 R.Contents:4x152.200 Atto® / piece 64.95€2x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€2x111.520 i.NEX - Connector set 120 / set 14.95€
Rhombus PL
Alpha indicator The micro Rhombus indicator has a striking design that is also available with bright position lights. Thanks to modern high-performance-LEDs and our specially control technology**, the micro Rhombus PL ensures better visibility in road traffic. In addition, they also allow others in traffic to better estimate your speed. Connected about the instrument lighting***, the increased power and crystal clear double look creates the impression of daylight-bright lights. Suitable for all motorcycle models*. * A load-independant relay or power resistors may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.*** The existing side light must be deactivated. ECE-tested for front Increased safety because of improved visibility Replaces the existing position light as well as the indicator Sensational new front look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Rhombus PL
Alpha indicator The micro Rhombus indicator has a striking design that is also available with bright position lights. Thanks to modern high-performance-LEDs and our specially control technology**, the micro Rhombus PL ensures better visibility in road traffic. In addition, they also allow others in traffic to better estimate your speed. Connected about the instrument lighting***, the increased power and crystal clear double look creates the impression of daylight-bright lights. Suitable for all motorcycle models*. * A load-independant relay or power resistors may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.*** The existing side light must be deactivated. ECE-tested for front Increased safety because of improved visibility Replaces the existing position light as well as the indicator Sensational new front look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Rhombus PL
Alpha indicator The micro Rhombus indicator has a striking design that is also available with bright position lights. Thanks to modern high-performance-LEDs and our specially control technology**, the micro Rhombus PL ensures better visibility in road traffic. In addition, they also allow others in traffic to better estimate your speed. Connected about the instrument lighting***, the increased power and crystal clear double look creates the impression of daylight-bright lights. Suitable for all motorcycle models*. * A load-independant relay or power resistors may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.*** The existing side light must be deactivated. ECE-tested for front Increased safety because of improved visibility Replaces the existing position light as well as the indicator Sensational new front look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism