Shop
Atto® RB Dark vm
’Seeing red’ right to the point! The Atto® RB Dark is another kid on the block of the highly successful Atto® family and probably the world’s smallest street legalrear and brake light for motorcycles. The Atto® already defined a completely new category of indicators: sensationally smalland spectacularly bright. The new rear and brake light Atto® RB Dark will be no different, but due to its dual function will take things even further. The light surface of the Atto® RB Dark would fit four times on a 1 Cent coin! Therefore the tail of a bike can get a complete clean look and feel. This rear and brake light will only grab your attention when it really has to! The brake light of the Atto® RB Dark warns with an intensity that is second to none. It keeps the following traffic at distance.Therefore the Atto® RB Dark is enhancing safety on the road. The Atto® RB Dark can be installed in different ways and offers more options to individualize a bike. It can be mounted in pairs or centrally as a single light! The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology. The complete electronics of the Atto® RB Dark are in the casing, this rear and brake light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear horizontal mounting sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Technikset - BMW R 1250 GS MY18-23 - LED 6-polig M8 Adapter
Technikset - BMW R 1250 GS MY18-23 - LED 6-polig M8 Adapterfür alle Dayron® (ohne Blinker)
Atto® RB vm
’Seeing red’ right to the point! The Atto® RB is another kid on the block of the highly successful Atto® family and probably the world’s smallest street legalrear and brake light for motorcycles. The Atto® already defined a completely new category of indicators: sensationally small and spectacularly bright. The new rear and brake light Atto® RB will be no different, but due to its dual function will take things even further. The light surface of the Atto® RB would fit four times on a 1 Cent coin! Therefore the tail of a bike can get a complete clean look and feel. This rear and brake light will only grab your attention when it really has to! The brake light of the Atto® RB warns with an intensity that is second to none. It keeps the following traffic at distance.Therefore the Atto® RB is enhancing safety on the road. The Atto® RB can be installed in different ways and offers more options to individualize a bike. It can be mounted in pairs orcentrally as a single light! The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks tothe use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparencytechnology. The complete electronics of the Atto® RB are in the casing, this rear and brake light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear vertical mounting sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Reflektor 123 x 12,5 mm
Reflector 123 x 12,5 mm Measure: 123 x 12,5 mm with M5 thread bolt
Bullet 1000® Adapter HD
Bullet Adapter HD After the Bullet 1000 series enjoys great popularity, many Harley riders wish to replace their original turn signals against the Bullet 1000 and thereby continue to use the front fasteners on the handlebars. To allow for unobtrusive cable routing, the adapter is a two-piece design that screws between the original handlebar mounts and the Bullet 1000. For the assembly between Bullet 1000 and the Bullet 1000 Adapter HD it is necessary to dismantle the original foot of the turn signal. Attention, do not damage the cables during disassembly! The original foot is screwed onto the turn signal body with a regular metric right-hand thread. two-piece design inconspicuous cable routing
BMW R 1300 GS Adventure Jetstream® CL + Jetstream® DF Set
BMW R 1300 GS Adventure Jetstream® CL + Jetstream® DF SetComplete set with all necessary parts for mounting and electrical connection of Jetstream® CL at the front and Jetstream® DF at the rear on a BMW R 1300 GS Adventure.Contents:2x194.200 Jetstream® CL / piece 129.95€2x196.200 Jetstream® DF / piece 129.95€1x123.762 Mounting plate B3 / set 29.95€1x123.763 Mounting plate B4 / set 29.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.520 i.NEX - Connector set 120 / set 14.95€1x111.522 i.NEX - Connector set 122 / set 12.95€
Rigid mounting M8 x 40 HD
Rigid Mounting Spare parts for micro and Rhombus series M8 x 40
Bullet 1000® Adapter HD
Bullet Adapter HD After the Bullet 1000 series enjoys great popularity, many Harley riders wish to replace their original turn signals against the Bullet 1000 and thereby continue to use the front fasteners on the handlebars. To allow for unobtrusive cable routing, the adapter is a two-piece design that screws between the original handlebar mounts and the Bullet 1000. For the assembly between Bullet 1000 and the Bullet 1000 Adapter HD it is necessary to dismantle the original foot of the turn signal. Attention, do not damage the cables during disassembly! The original foot is screwed onto the turn signal body with a regular metric right-hand thread. two-piece design inconspicuous cable routing
Dayron® Innovation, Extension arm
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
i.NEX - Connector set 191
i.NEX - Connector set 191Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (rear indicators)
Mounting Plates for Yamaha ISY2
Mounting Plates 123.757 used for:YamahaFZ6 Fazer '04 front/rearYZF R6 '03 front/rearTDM 900 '02 front/rearYZF R1 '02 front/rear
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
i.NEX - Connector set 162
i.NEX - Connector set 162Vehicle-specific plug & play set for connecting the i.NEX consisting of a adapter cables with matching plug. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2015 (rear 3in1)
Atto® WL
The "White" Light The Atto® WL/WL Dark is the new kid on the block of the highly successful Atto® family and at once the first single position light from Kellermann. The Atto® already defined a completely new category of indicators: sensationally small and spectacularly bright. Compact and illuminating power: With this combination the Atto® WL is a real sensation! The light surface of the Atto® WL/WL Dark would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto®WL basically disappears on the motorcycle. The position light shines with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. The Atto® WL offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! Therefore the Atto® WL is enhancing safety on the road. ECE-tested for front EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Bullet 1000® PL white
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. Bullet 1000® PL white The Bullet 1000® PL white is an indicator with an integrated position light in the shape of a continuous white light ring. Together with the main light they boost the safety features of the bike.The Bullet 1000® PL white has a unique feature: Once the indicator is activated the position light is temporarily switched off to allow the indictor to be even more visible. Shortly after the indicator stops the position light is activated again. As the Bullet 1000® Extreme so does the Bullet 1000® PL white offer the LED typical fast response** combined with Bullet typical soft response of the inner light section. Alltogether a harmonic indicator performance that blends in with the great overall look and feel of this amazing product. The position lights can be mounted either on the original position light base or connected to the dashboard light of the motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of improved visibility Replaces the existing position light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
Dayron® Innovation, U Adapter
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
i.NEX - Connector set 190
i.NEX - Connector set 190Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (front indicators)
Harley-Davidson FLSS 1802 SOFTAIL SLIM S ab MJ 2016 Atto® DF Set
BMW S 1000 RR Atto® DF Set(for original 3-in-1 rear lights)Complete set with all necessary parts for mounting and electrical connection of Atto® DF rear on a BMW BMW S 1000 RR .Contents:2x156.200 Atto® DF / piece 99.95€1x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.522 i.NEX - Connector set 122 / set 12.95€
Aprilia Tuono V4 1100 Factory MJ 2017 -2022 Heck 2 X Atto® Set
Aprilia Tuono V4 1100 Factory MJ 2017 -2019 Rear 2 X Atto® SetComplete set with all necessary parts for mounting and electrical connection of Atto® at the rear of a Aprilia Tuono V4 1100 Factory MJ 2017 -2019.Contents:2x152.200 Atto® / piece 64.95€1x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.511 i.NEX - Connector set 111 / set 12.95€
Technicset i - Harley-Davidson Pan America 1250 MY23
Technicset i - Harley-Davidson Pan America 1250 MY23for all Dayron® I (with indicator)
i.NEX - Connector set 124
i.NEX - Connector set 124Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables. The set is suitable for the following motocycle models: BMW (rear 3in1 lights)BMW R nine T 214 -2017 R NineT 2017 - 2021 R18 MJ 2020/21
Aprilia Tuono V4 1100 Factory MJ 2017 -2022 Front 2 X Atto® Set
Aprilia Tuono V4 1100 Factory MJ 2017 -2019 Front 2 X Atto® SetComplete set with all necessary parts for mounting and electrical connection of Atto® at the frontof a Aprilia Tuono V4 1100 Factory MJ 2017 -2019.Contents:2x152.200 Atto® / piece 64.95€1x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.510 i.NEX - Connector set 110 / set 14.95€
Mounting Plates for Suzuki
Mounting Plates 123.750 used for:Universal Adapterplate for all Suzuki Motorcycles front/rear
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
Yamaha XSR 700 2022 4 x Atto® Set
Honda VFR 800X Crossrunner MJ 2018 4 X Atto® SetComplete set with all necessary parts for mounting and electrical connection of Atto® at the front and rear of a Honda VFR 800X Crossrunner MJ 2018.Contents:4x152.200 Atto® / piece 64.95€2x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€2x111.544 i.NEX - Connector set 144 / set 14.95€
i.NEX - Cable set MO
i.NEX - Cable set MOExtension set i.NEX input - 2 x 5-core, 70 cm