Shop
Rigid mounting M8 x 40mm
Atto® rigid mounting M8 x 40mm, black for use with original 8mm bore
Variable mounting adaptor M6, black
Variable mounting adaptor M6, black This adaptor offers a clean and easy solution for various mounting options and thus replaces an otherwise complex custom-made construction.It consists of two parts: A clamping sheet and a shank nut with an M6 internal thread. The clamping sheet, which can be shifted and rotated on the shank nut, is compatible with any M5 threaded lamp (Atto®, micro S, Rhombus S) at every angle.Due to the variances of this mounting the lamp can be installed in perfect alignment with the direction of traffic and is locked in place with grub screws. For example underneath the instruments (see pictures attached).Simply replace the shaft nut of the brake or clutch lever by this shank nut. As on the pictures attached, the clamping sheet can also be installed together with the handlebar mirror.
micro 1000® LED Dark
Long lasting The micro 1000® LED replace the rear as well as the front indicators because of their bright beam. Thanks to our specially control technology** the micro 1000® LED series offers an especially high light output with almost unlimited life span. They are available in either modern clear or in the classic yellow glass versions. Suitable for all motorcycle models*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs ECE-tested for front and rear Improved safety because of brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
i.NEX - Connector set 122
i.NEX - Connector set 122Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables. The set is suitable for the following motocycle models: BMW (rear 3in1 lights)R 1300 GS R 1300 GS Adventure R 1250 GS R 1250 GS Adventure R 12 R 12 nineT 2023 - R nineT 2017 - R nineT Pure R nineT Scrambler R nineT Urban G/S R 18 2020 - R 18 Classic CE 04 S 1000 XR 2024 - S 1000 XR 2020 - 2023 S 1000 R 2021 - M 1000 XR M 1000 RR 2023 - M 1000 R 2023 - M 1000 RR 2021 - 2022 S 1000 RR 2019 -
Jetstream® CL
Jetstream® CL With the Jetstream® CL, Kellermann now offers the world's most spectacular motorcycle indicator with a cruising light. The Jetstream® CL is therefore the first indicator with this function on the accessory market. With the cruising light function, the indicators light up permanently as a position light with amber color. When the indicator is activated, it then takes over the indicator function with the sequential light effect. Two parallelly illuminated position lights visually widen the silhouette of the vehicle, which is particularly helpful for the visibility of the bike for oncoming traffic. The brightness of the Kellermann Jetstream® CL is extreme; no other sequential lighting indicator with ECE approval for motorcycles has achieved these levels of this intensity to date. The indicator function is displayed via a bright and slit-like beam along the entire wing edge. Kellermann thus pushes the upper limit of brightness and ensures maximum added safety on the road.With the new Jetstream® CL, all motorcycles can now be retrofitted with an amber cruising light and indicator function with sequential lighting effect. Motorcycles with a standard cruising light and indicator function can be changed to the Kellermann Jetstream® CL. Highest illuminating power Kellermann high power LED technology State-of-art „IC“- chip technology 32 MHz real time micro processor controlled Silent-Current, advanced Power Saving Algorithm High measure of visibility across a wide angle range Longlife Protection Guard®, IC operated, 330 kHz Flow-optimized metal housing, high quality manufacturingSuitable for 12 volt DC applications With M8 x 20 mm thread High-quality vibration-absorbing bearing European design protection
i.NEX - Cable set MO
i.NEX - Cable set MOExtension set i.NEX input - 2 x 2-core, 2 m
Spot®
"Lights on, Spot® on!" - Special edition with a sporty shape As Kellermann is known for, the Spot® is also super compact and brilliantly bright like no other indicator. This special edition is unusual due to its much sportier shape. With the Spot®, Kellermann's big anniversary party continues: over 30 years of the finest lighting technology on motorbikes - Made in Germany, of course!The shape of the Spot® makes all the difference: Slightly extended in length and a strong base that fits closely to the motorbike. This looks sporty, not only on sports bikes! The Spot® also looks really good on any bike. "Lights on, Spot® on" - the new Spot® makes for a particularly strong appearance!Kellermann Spot® - compact and bright as ever, but sportier!ECE-tested for front and rear EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Extension 30mm, M8, chrom
Extension Spare parts for Silentgummiadapters (123.620, 123.610, 170.620) Measure: M8 x 30mm
Flasher Relay R1
Micro relay for the pros The R 1 flasher relay has very small dimensions and flashes independently of load at a steady 75 pulses per minute. It also has a connection available for the flasher dashboard light. It is easily installed into the feed to the indicator switch, or can be swapped with the original 2-3 pole flasher relay. It is therefore suitable for all motorcycles with indicator switches. Should the change to LED indicators result in the non-intentionally activated indicators also flashing; then the indicator control light must also be connected to the R 1 relay. The ‘hazard warning’ effect will then be effectively All necessary components required for installation are included. ECE-tested Simple installation in feed to the indicator switch or swap the original 2-3 pole flasher relay Connection to indicator control light also possible Restricts the accompanying flashing of non-activated indicators Load-independent / steady flash rate Switching capacity 0-50W by 12V/ 0-24W by 6V Very small dimensions 22 x12 x 6 mm (L/W/H) Suitable for indicator switches Suitable for 6 and 12 volt DC applications
Atto® DF Integral
Clean Look The Atto® DF Integral is the first built-in version from Kellermann, it can be fully integrated into the fairing or other components. The slim casing almost fully disappears and gives the desired ‘clean look’ when it comes to customizing. Behind the extremely small yet sensationally bright Atto® DF Integral lays a multifunctional all-rounder: At the rear it is visually almost completely disguised with a light surface, which would fit four times on a 1 Cent coin! In result the rear of the motorcycle can be designed as clean and individual as never before. However, in action the Atto® DF Integral shines with an intensity which has made Kellermann products legendary – it’s not the size but the illumination power that counts. Indicators, rear and brake light warn with an uncompromising intensity, clearly signalling the following traffic to keep its distance.Kellermann’s well-known HighPower LED technology** and EXtranz® - Extreme Optical Transparency Technology manage an optimized light channelling through a smart system of lenses and reflectors and thus enabling this combination of sensational brilliance and minimal size. The Atto® DF Integral can be combined with various other series e.g. Atto® or Bullet 1000®.The complete electronics of the Atto® DF Integral are in the casing, this Atto® DF Integral can be plugged into the 12 volt net directly.* In order to protect the Atto© DF Integral from a possible thermal overload, a heat sink in the form of an optionally screw-on ribbed housing is provided. Dimensions heat sink approx.: 24.5x8.9 mm * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear Completely new styling options Replaces the existing rear / brake light as well as indicators Sensational new rear look EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection With M5 x 0,5 x 6,5 mm fastening screw
Replacement fuses
Posi-Tap branch connector set of 6
Content: 6 Piece(s) (€1.66 / 1 Piece(s))
Atto® RB Integral
Indicator power ready for built-in! With the Atto® Integral & Atto® Dark Integral the highly successful Atto® indicator is now available as a built-in version. Almost invisible and with full illuminating power: With this combination the Atto® Integral /Atto® Dark Integral is a real hidden talent!Never before did one of our indicators disappear so easily. The build-in version offers completely new styling options for the motorcycle. The slim casing fits in perfectly and enhances the ‘clean look’ when customizing. This indicator is hiding and styling at the same timeThe Atto® Integral /Atto® Dark Integral flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power in a slim casing, this extremely compact light offers the best of Kellermann in a built-in version. We advise not to look for too long into the beam of this little power house.The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the proven EXtranz® - Extreme Optical Transparency technology.The complete electronics of the Atto® Integral / Atto® Dark Integral are in the casing, this indicator can be plugged into the 12 volt net directly.** Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Completely new styling options Sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
i.LOAD - IL 27
i.LOAD - IL 27 Usage for Kellermann LED turn signal with original 10 watt turn signals - 1 piece per turn signal. When installing new indicators the flashing rate of the indicator or the control light may increase. Load independent relays (e.g. R2) or multifunctional assistance systems (e.g. CR4®) can fix the problem. If the installation is not possible or favored ,an i.LOAD can also fix the problem.
micro 1000® DF Dark
Simply Triple Our innovative indicator-brake-rear light combination in the stylish micro 1000® housing makes it possible to take a new direction when individualizing the rear of your bike. The original tail light can be eliminated. The micro 1000® DF Dark are made to the highest standards of quality and are now available with the option of clear or dark tinted lenses. The characteristically bright double rear lights of the micro 1000® DF Dark sets new standards. Using our tried and tested Kellermann HighPower LED Technology** coupled with its compact housing translates to an extremely lightweight unit. Suitable for all motorcycle models*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
i.NEX - Connector set 120
i.NEX - Connector set 120 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: BMW indicatorR nine T 2018 R 1300 GSR 1300 GS AdventureR 1250 GSR 1250 GS AdventureR 1200 GS LC 2013 - 2016R 1200 GS LC - 2017R 1200 GS LC Adv. ab 2014R 1200 GS 2008 - 2009R 1200 GS 2010 - 2012R 1200 GS - 2007R 1200 GS Adv. 2008 - 2009R 1200 GS Adv. 2010 - 2013R 1200 GS Adv. -2007R 1250 R 2019-2022R 1200 R LCR 1200 R 2011 - 2014R 1200 R - 2010R 1250 RS 2019 - 2022R 1200 RS LCR 12R 12 nineT 2023R nineT 2014 - 2016R nineT 2017 - 2024R nineT /5R nineT PureR nineT RacerR nineT ScramblerR nineT Urban G/SHP2-SportF 900 GS ADV 2023 - F 900 GS 2023 -F 900 XRF 900 RF 850 GS 2018 -F 850 GS Adv 2019 -F 800 GS 2023 -F 800 GS 08/2012 - 2016F 800 GS - 07/2012F 800 GS 2017 - 2018F 800 GS Adventure 2013 -F 750 GS 2018 -F 700 GS - 2016F 700 GS 2017 -F 800 R 2015 -F 800 R - 2011F 800 R 2012 - 2014F 800 SF 800 STF 800 GTF 650 GS 2008 -K 1300 RK 1300 SK 1200 RK 1200 SK 1200 R SportS 1000 XR - 2019S 1000 R 2017 - 2020S 1000 R 2014 - 2016S 1000 RR 2015 - 2016S 1000 RR 2017 - 2018S 1000 RR 2012 - 2014S 1000 RR - 2011
micro S Dark
Intelligently disguised The micro S Dark belongs to the compressed version "S" of the famous Kellermann micro 1000® series.In the new format, the micro S Dark reflects the strong trend towards even more compressed lights and opens up new design possibilities for motorcycles. Due to the drastic size reduction and the strongly tinted indicator’s glass, the "indicator" component disappears almost completely.In action however the high performance LEDs provide a spectacularly bright light, which Kellermann indicators are now for! The well-known Kellermann HighPower LED Technology** and the new EXtranz®- Extreme Optical Transparency Technology enable an optimized light channeling. As the complete electronics of the micro S Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* Combined at front and back the offer a perfect look. Suitable for all motorcycle models.** Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Strongly tinted glass – spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5 x 0,5 x 6,5 mm thread European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Bullet 1000® DF
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. Bullet 1000 DF The Bullet 1000® DF is a rear indicator in combination with a rear and brake light function. It replaces the existing indicators, brake and rear light. The light of the continuously glowing red rings give the tail of the motorcycle a spectacular look**. When breaking, the light circle of the brake light shines strong and clear, the clear message to the following traffic is: Keep your distance. The Bullet 1000® DF at the tail and the Bullet 1000® PL, Bullet 1000® PL white or Bullet 1000® Extreme in the front are the perfect combination for your motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
Atto® Integral
Indicator power ready for built-in! With the Atto® Integral the highly successful Atto® indicator is now available as a built-in version. Almost invisible and with full illuminating power: With this combination the Atto® Integral is a real hidden talent! Never before did one of our indicators disappear so easily. The build-in version offers completely new styling options for the motorcycle. The slim casing fits in perfectly and enhances the ‘clean look’ when customizing. This indicator is hiding and styling at the same time. The Atto® Integral flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power in a slim casing, this extremely compact light offers the best of Kellermann in a built-in version. We advise not to look for too long into the beam of this little power house. The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the proven EXtranz® - Extreme Optical Transparency technology. The complete electronics of the Atto® Integral are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear Completely new styling options Sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
Bullet 1000® Extreme
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. Bullet 1000 DF The Bullet 1000® DF is a rear indicator in combination with a rear and brake light function. It replaces the existing indicators, brake and rear light. The light of the continuously glowing red rings give the tail of the motorcycle a spectacular look**. When breaking, the light circle of the brake light shines strong and clear, the clear message to the following traffic is: Keep your distance. The Bullet 1000® DF at the tail and the Bullet 1000® PL, Bullet 1000® PL white or Bullet 1000® Extreme in the front are the perfect combination for your motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
BL 1000 LED
New, and already a classic The BL 1000 LED is the latest development in handlebar end indicators. Our specially control technology**, the modern high-performance-LEDs and the innovative clear glass look meanperformance as well as beautifully proportioned styling at the end of the handlebar. The BL 1000 LED combines function with handlebar vibration damping. All necessary adapters are supplied for mounting on to most model handlebars*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of brightness and direct response of LEDs Handlebar vibration damping function Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
i.LOAD - IL 7,5
i.LOAD - IL 7,5 Usage for Kellermann LED turn signal with original 21 watt turn signals - 1 piece per turn signal. When installing new indicators the flashing rate of the indicator or the control light may increase. Load independent relays (e.g. R2) or multifunctional assistance systems (e.g. CR4®) can fix the problem. If the installation is not possible or favored ,an i.LOAD can also fix the problem.
Rigid mounting M8 x 40 HD
Rigid Mounting Spare parts for micro and Rhombus series M8 x 40
Flasher Relay R2 Typ K
The Classic The load-independent R2 flasher relay is the universal problem solver when using LED and halogen indicators. It replaces all original 2-3 pole flasher relays and delivers a constant and correct flashing frequency. Connection is simple. If following the conversion to LED indicators, the non-activated indicators also flash, then all that is required is for the relay to be connected to a left and a right indicator in order to reliably cure this problem*. With vehicle specific plug, suitable for many Kawasaki models. ECE-tested Replaces the original 2-3 pole flasher relay Restricts the accompanying flashing of non-activated indicators Load-independent / steady flash rate Switching capacity 0,5-85 watt Small dimensions 34x22x12 [mm] (L/W/H) High quality metal housing Suitable for indicator switches Suitable for 12 volt DC applications
i.SED - Performance
i.SED - Performance i.SED - This performance accessory secures a continuous power supply only when the ignition is switched on. Any quiescent currents will be eliminated. Suitable for all products with particularly high power, e.g. Jetstream indicator, Jetstream DF and Dayron PL. Easy installation Continuous power supply only when ignition is switched on Ilimination of quiescent currents Trouble free operation of all Kellermann Jetstream products