Shop
Posi-Lock cable connector 5pieces/ 9 pieces
Posi-Lock cable connector splash water connections. The cable is connection between seconds, without soldering.
Content: 9 Piece(s) (€1.44 / 1 Piece(s))
Posi-Lock cable connector MINI
Posi-Lock cable connector MINI Splash water connections The cable is connection between seconds, without soldering
Content: 5 Piece(s) (€1.99 / 1 Piece(s))
i.NEX V4
Kellermann i.NEX: One for all! All indicators, all motorcyclesNo more conversion stress - i.NEX is the all-rounderThe Kellermann i.NEX now makes converting motorcycle lights as easy as possible.Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.When things need to be simple - the i.NEX puts an end to the despair of the mechanic and incalculable hours of work in the workshop! Motorcycle electronics are becoming more complex every year, making the installation of retrofittable lights increasingly time-consuming and nerve-wracking. It is often not clear which accessories are required for the conversion or what problems can arise during the conversion. The solution: Kellermann i.NEX - the box that can do everything!The i. NEX can be used to connect up to four indicators as well as a rear light, brake light and position light. The i.NEX series also offers connection accessories with matching connector and cable sets. This makes conversion simple and effective.Small effort, big effect - the lights are connected directly to the i. NEX. The i.NEX is set according to the requirements of the on-board electronics using rotary switches. No matter which light, no matter which motorcycle - only the Kellermann i.NEX can do it!Kellermann i.NEX - Always the right choice - error messages in the cockpit, incorrect flashing frequency of indicators and indicator control lights as well as disturbing idle currents are now a thing of the past.In addition, the i.NEX series offers the solution for various requirements, e.g. when fitting indicators with higher power consumption or higher voltage than original as well as original minus-switched indicators.Kellermann i.NEX - Complicated becomes simple!i. NEX at a glance:Electronic universal solution for motorcycle lights such as indicators, rear/brake light and position lightCompatible with classic bikes, new models and modern operating systemsCorrect flashing frequencyNo error messages in the cockpitNo disruptive quiescent currentsInstallation of indicators with higher power consumption [watts] than originalInstallation of indicators with lower power consumption [watts] than originalInstallation on motorcycles with minus-switched indicatorsTechnical information: The i.NEX - V4 is suitable for standard 3-4 volt lights up to 10 watts total power of the functions to be replacedCalculation: Constant lights: Full power / indicators: Half power Example: Tail light 1W + brake light 3W + blinker 3W (1.5W) + blinker 3W (1.5W) = 7W The volts and watts are specified on the lenses of the standard lights. A different product is required in the following cases: 21 watt indicators i.LOAD - IL 7,5 – one piece per indicatorAlternatively: If a manual 2-3 pole indicator relay is fitted to the vehicle as standard (optional) Blinkrelais R1 – one piece per vehicle Blinkrelais R2 – one piece per vehicle 5-9 Volt lights / on-board voltage 12 Volt i.NEX - V8 12 Volt lights / on-board voltage 12 Volti.NEX - V12 A customized solution is required in the following cases: Email to customer service Main headlights, daytime running lights, fog lights US vehicles >12 Volt on-board voltage
i.NEX - Connector set 150
i.NEX - Connector set 150Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug.The set is suitable for the following motocycle models: Harley-Davidson 3in1 lightsSoftail from 2016 (except FLSTC & FLSTN)
BL 1000 Halogen lamp
Halogen lamp for BL 1000 yellow / BL 1000 white (halogen) 12V/H21W ECE-tested
micro 1000® Extreme
All-rounder The micro 1000 Extreme is one of the brightest Kellermann indicator of all-time. It is highly versatile and is the first Kellermann indicator that can be used in multiple applications including quads, cars and trailers (homologated according to ECE-R6). The micro 1000 Extreme can be installed within 20 mm to the main headlamp. Kellermann HighPower LED Technology** uses two LEDs producing an extraordinarily bright indicator. Due to this greater illumination it is recognized much more quickly in traffic providing for maximum road safety*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for front and rear Applicable on all vehicles(e. g. motorcycles, quads, cars, Super Seven, trailers, etc.) Extreme light power Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 thread Replaceable flexible rubber adapter protects the indicator from vibration damage and vandalism
Rhombus S
Corners and edges The Rhombus stands for recognizable, striking design. Its distinct shape creates a unique style. Supplied in a stylish metal housing, the Rhombus has a very wide light beam. An almost unlimited lifespan is guaranteed with our specially control technology**. The Rhombus replaces the front as well as the rear indicators and gives a new look. Suitable for all motorcycle models*.* Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Improved safety because of the brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Mounting plate 174mm
Atto® Montageblech 174mm Zur Montage von Atto® Blinkern an kurzen Kennzeichen
Atto® RB Dark Integral
Rear and brake light power ready for built-in! The Atto® RB Dark Integral is another kid on the block of the highly successful Atto® family and probably the world’s smallest street legal rear and brake light for motorcycles. The Atto® RB Dark Integral defines a completely new category for built-in indicators. The new rear and brake light Atto® RB Dark Integral due to its dual function will take things even further. The light surface of the Atto® Dark Integral would fit four times on a 1 Cent coin! Therefore the tail of a bike can get a complete clean look and feel. This rear and brake light will only grab your attention when it really has to! The brake light of the Atto® RB Dark Integral warns with an intensity that is second to none. It keeps the following traffic at distance. Therefore the Atto® RB Dark Integral is enhancing safety on the road. The Atto® RB Dark Integral comes in a slim casing that allows almost seamless installation at the tail, giving more options to individualize any bike. It can be mounted in pairs or centrally as a single light! The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology. The complete electronics of the Atto® RB Dark Integral are in the casing, this rear and brake light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear Completely new styling options Sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
Dash M
The extremely bright dashboard indicators! Almost invincible when turned off, but unbeatable in action: Thanks to the mounting position under the handlebars, the new Dash indicators virtually disappear visually at the front of the motorcycle. At the same time, the Kellermann Dash indicators offer maximum brightness with minimum size. This means that the credo of Kellermann's compact indicators now also applies to the new generation of dashboard indicators: "sensationally small - spectacularly bright". The optimized light control of the new Dash family is also achieved by a sophisticated system of lenses and reflectors. The Kellermann HighPower LED** and EXtranz® - Extreme Optical Transparency technology are used here.The complete electronics of the Dash M Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-testedfor front sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
i.BOS - EL1
i.BOS - EL1 Serves as a quick fix for inaccurate cockpit displays The i.BOS systems (intelligent boxing operation system) provide a quick fix, if after the installation of the indicator the control light flashes too quick or other control lights in the cockpit function inaccurately. i.BOS - EL1 provides correct function of the hazard light, e.g. when using DF versions. *Additionally and on case by case the option "LED indicator" has to be activated in the software. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, light)
Atto® WL
The ´White´ Light The Atto® WL is the new kid on the block of the highly successful Atto® family and at once the first single position light from Kellermann. The Atto® WL already defined a completely new category of indicators: sensationally small and spectacularly bright. Compact and illuminating power: With this combination the Atto® WL is a real sensation! The light surface of the Atto® WL would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle.In fact, the Atto®WL basically disappears on the motorcycle. The position light shines with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. The Atto® WL offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! Therefore the Atto® WL is enhancing safety on the road. The Atto® WL can be used on multiple applications including quads, cars and trailers (homologated according to ECE-R 6/ R 7). The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology. The complete electronics of the Atto® WL are in the casing, this position light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
micro 1000® Extreme
All-rounder The micro 1000 Extreme is one of the brightest Kellermann indicator of all-time. It is highly versatile and is the first Kellermann indicator that can be used in multiple applications including quads, cars and trailers (homologated according to ECE-R6). The micro 1000 Extreme can be installed within 20 mm to the main headlamp. Kellermann HighPower LED Technology** uses two LEDs producing an extraordinarily bright indicator. Due to this greater illumination it is recognized much more quickly in traffic providing for maximum road safety*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for front and rear Applicable on all vehicles(e. g. motorcycles, quads, cars, Super Seven, trailers, etc.) Extreme light power Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 thread Replaceable flexible rubber adapter protects the indicator from vibration damage and vandalism
Rhombus S
Corners and edges The Rhombus stands for recognizable, striking design. Its distinct shape creates a unique style. Supplied in a stylish metal housing, the Rhombus has a very wide light beam. An almost unlimited lifespan is guaranteed with our specially control technology**. The Rhombus replaces the front as well as the rear indicators and gives a new look. Suitable for all motorcycle models*.* Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Improved safety because of the brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Spot® Dark
"Lights on, Spot® on!" - Special edition with a sporty shape As Kellermann is known for, the Spot® is also super compact and brilliantly bright like no other indicator. This special edition is unusual due to its much sportier shape. With the Spot®, Kellermann's big anniversary party continues: over 30 years of the finest lighting technology on motorbikes - Made in Germany, of course!The shape of the Spot® makes all the difference: Slightly extended in length and a strong base that fits closely to the motorbike. This looks sporty, not only on sports bikes! The Spot® also looks really good on any bike. "Lights on, Spot® on" - the new Spot® makes for a particularly strong appearance!Kellermann Spot® - compact and bright as ever, but sportier!ECE-tested for front and rear EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Mounting Plates
Mounting Plates 123.753 used for:Italian Motorcycles (Ducati, Moto Guzzi, usw.)
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
Dash M
The extremely bright dashboard indicators! Almost invincible when turned off, but unbeatable in action: Thanks to the mounting position under the handlebars, the new Dash indicators virtually disappear visually at the front of the motorcycle. At the same time, the Kellermann Dash indicators offer maximum brightness with minimum size. This means that the credo of Kellermann's compact indicators now also applies to the new generation of dashboard indicators: "sensationally small - spectacularly bright". The optimized light control of the new Dash family is also achieved by a sophisticated system of lenses and reflectors. The Kellermann HighPower LED** and EXtranz® - Extreme Optical Transparency technology are used here.The complete electronics of the Dash M Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-testedfor front sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
Extension 10mm, M6
Extension Spare part for micro and Rhombus series Dimensions: M6 x 10mm
Bullet 1000® PL
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicator with white position light and indicator with rear and brake light. Bullet 1000® PL The Bullet 1000® PL is an indicator with an integrated position light in the shape of a continuous white light ring. Together with the main light they boost the safety features of the bike. And once the indicator is activated the position lights support the indicator function by flashing in sync. After the indicator has been turned off the position light will resume its function. As the Bullet 1000® Extreme so does the Bullet 1000® PL offer the LED typical fast response** combined with Bullet typical soft response of the inner light section. Alltogether a harmonic indicator performance that blends in with the great overall look and feel of this amazing product. The position lights can be mounted either on the original position light base or connected to the dashboard light of the motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for front ECE regulation for yellow position lights:A position light can send out white or yellow light.In the ECE regulation 52, paragraph 5.13., it is stated:"Colours of the lights: position light can be white or yellow" If yellow light is send out, two position lights have to be installed.Additionally paragraph 6.6.1 states:"Number: two (one for each site), if yellow" Increased safety because of improved visibility Replaces the existing position light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
Silent rubber adapter KH 1000
Silent rubber adapter KH 1000 Spare part for KH 1000 Length: 10 mm, with M8 thread
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
i.NEX - Connector set 175
i.NEX - Connector set 175Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug. The set is suitable for the following motocycle models: MV Agusta Blinker 800 Brutalle RR MJ 2018
BL 2000 Chrom
Be seen but not seen With the BL 2000 bikers can design the handlebar end of their bike in a new way and have a high performance indicator at the same time, making it also an attractive option for sports bikes. Its tinted ring-shaped glass sits unobtrusively in the black metal housing and gives the handlebar a tasteful ending.Although the indicator mounts discreetly on the motorcycle, when in use it shows its true size and will surprise you with its highly noticeable bright flashing. Thias is achieved by the use of the very latest development in Kellermann HighPower LED Technology**. All necessary adapters are supplied for mounting on to most model handlebars.* * Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Ring-shaped glass – spectacularly bright An indicator which is also an elegant complement to your handlebar Indicators visually merge into the bike when not in use Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
i.NEX - Connector set 152
i.NEX - Connector set 152Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3in1 lightsBreakoutSlim