Lights
Dayron® i Classic, M8 Adapter
Dayron® PL Powerful addition to the low beam, day and night, for even more safety! The Kellermann Dayron® PL is now available as a position light with flashing function.The Dayron® PL is used together with the low beam and can be operated both during the day and at night. This significantly increases the motorbike's light image. Together with the highest light output of all ECE-approved position lights on the market, the Dayron® WL ensures significantly greater visibility of the motorbike and thus reduces the risk of accidents.If there is no sufficiently fused ignition plus for connecting the Dayron PL, you can use our i.SED Performance ..ECE approvedExtreme light output - more safety through greater visibilityUnique, brilliant light surface with striking new lens technologySupplements the existing low beamCan be operated during the day and at nightKellermann HighPower LED technologyLonglife Protection Guard®, IC controlled, 330kHz clockedFlow-optimised aluminium housingSuitable for 12 volt DC vehicle electrical systemsWith M8 x 20 mm mounting threadEurope-wide protected design
Atto® WL
The "White" Light The Atto® WL/WL Dark is the new kid on the block of the highly successful Atto® family and at once the first single position light from Kellermann. The Atto® already defined a completely new category of indicators: sensationally small and spectacularly bright. Compact and illuminating power: With this combination the Atto® WL is a real sensation! The light surface of the Atto® WL/WL Dark would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto®WL basically disappears on the motorcycle. The position light shines with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. The Atto® WL offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! Therefore the Atto® WL is enhancing safety on the road. ECE-tested for front EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Atto® WL Dark
The ´White´ Light The Atto® WL Dark is the new kid on the block of the highly successful Atto® family and at once the first single position light from Kellermann. The Atto®/Atto® Dark already defined a completely new category of indicators: sensationally small and spectacularly bright. Compact and illuminating power: With this combination the Atto® WL Dark is a real sensation! The light surface of the Atto® WL Dark would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto®WL Dark basically disappears on the motorcycle.The position light shines with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. The Atto® WL Dark offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! Therefore the Atto® WL Dark is enhancing safety on the road.The Atto® WL Dark can be used on multiple applications including quads, cars and trailers (homologated according to ECE-R 6/ R 7).The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology.The complete electronics of the Atto® WL Dark are in the casing, this position light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Rhombus DF
Simply triple Our innovative indicator-brake-rear light combination in our distinctive micro Rhombus housing offers new styling options for the rear of your bike. The original tail light can be eliminated. Made to the highest standards of quality, the micro Rhombus DF are now available with the option of clear or dark tinted lenses. With its characteristically bright double rear lights the micro Rhombus DF are the latest trend in indicator design. Kellermann HighPower LED Technology** coupled with its compact housing translates to an extremely lightweight unit. Suitable for all motorcycle models*. * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
BL 1000 yellow
Trademark - Kellermänner® In the motor bike scene the noble products are true cult and only referred to as‘Kellerman’s‘. Our reliable technology and impressive handlebar vibration dampingfunctionality come together in the bar end BL 1000. Machined from high qualitymaterials, this timeless shape harmonizes perfectly with the micro 1000 series.All necessary adapters are supplied for mounting on to most model handlebars. ECE-tested for front Handlebar vibration damping function 21 Watt Halogen lamp High quality metal housing Suitable for 12 volt DC applications
Bullet 1000® DF
Classic meets Hightech The Bullet 1000® RB combines and replaces the original rear and brake lights at the tail of the motorcycle. The high quality metal housing fits any demanding bike style like a jewel. The homogenous circular red rear light ring adds a spectacular appearance. The radiant brake light keeps the following traffic at distance, thus ensuring more safety on the road. In addition to the proven Kellermann HighPower LED Technology** the specially for this series developed Kellermann HPT® light technology ensures a homogeneous circular beam, bringing the overall impression of the product to perfection.* Available in chrome or black the Bullet 1000® RB can be combined with other indicator series e.g. Bullet 1000® or the miniature Atto® series. * Elekctronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing rear/brake light Unique and homogeneous light ring with a tinted glass HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
Atto® Integral
Indicator power ready for built-in! With the Atto® Integral the highly successful Atto® indicator is now available as a built-in version. Almost invisible and with full illuminating power: With this combination the Atto® Integral is a real hidden talent! Never before did one of our indicators disappear so easily. The build-in version offers completely new styling options for the motorcycle. The slim casing fits in perfectly and enhances the ‘clean look’ when customizing. This indicator is hiding and styling at the same time. The Atto® Integral flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power in a slim casing, this extremely compact light offers the best of Kellermann in a built-in version. We advise not to look for too long into the beam of this little power house. The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the proven EXtranz® - Extreme Optical Transparency technology. The complete electronics of the Atto® Integral are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear Completely new styling options Sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
Atto® RB Integral
Indicator power ready for built-in! With the Atto® Integral & Atto® Dark Integral the highly successful Atto® indicator is now available as a built-in version. Almost invisible and with full illuminating power: With this combination the Atto® Integral /Atto® Dark Integral is a real hidden talent!Never before did one of our indicators disappear so easily. The build-in version offers completely new styling options for the motorcycle. The slim casing fits in perfectly and enhances the ‘clean look’ when customizing. This indicator is hiding and styling at the same timeThe Atto® Integral /Atto® Dark Integral flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power in a slim casing, this extremely compact light offers the best of Kellermann in a built-in version. We advise not to look for too long into the beam of this little power house.The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the proven EXtranz® - Extreme Optical Transparency technology.The complete electronics of the Atto® Integral / Atto® Dark Integral are in the casing, this indicator can be plugged into the 12 volt net directly.** Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-tested for front and rear Completely new styling options Sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
BL 1000 LED
New, and already a classic The BL 1000 LED is the latest development in handlebar end indicators. Our specially control technology**, the modern high-performance-LEDs and the innovative clear glass look meanperformance as well as beautifully proportioned styling at the end of the handlebar. The BL 1000 LED combines function with handlebar vibration damping. All necessary adapters are supplied for mounting on to most model handlebars*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of brightness and direct response of LEDs Handlebar vibration damping function Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
Atto® WL
The ´White´ Light The Atto® WL is the new kid on the block of the highly successful Atto® family and at once the first single position light from Kellermann. The Atto® WL already defined a completely new category of indicators: sensationally small and spectacularly bright. Compact and illuminating power: With this combination the Atto® WL is a real sensation! The light surface of the Atto® WL would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle.In fact, the Atto®WL basically disappears on the motorcycle. The position light shines with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. The Atto® WL offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! Therefore the Atto® WL is enhancing safety on the road. The Atto® WL can be used on multiple applications including quads, cars and trailers (homologated according to ECE-R 6/ R 7). The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology. The complete electronics of the Atto® WL are in the casing, this position light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Dayron® Classic, M8 Adapter
Dayron® WL All you need to know: Powerful addition to the low beam, day and night, for even more safety!The Dayron ® WL is used together with the low beam and can be operated both during the day and at night. This significantly increases the motorbike's light image. Together with the highest light output of all ECE-approved position lights on the market, the Dayron® WL ensures significantly greater visibility of the motorbike and thus reduces the risk of accidents.If there is no sufficiently fused ignition plus for connecting the Dayron WL, you can use our i.SED Performance .ECE approved for frontExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing low beamCan be operated during the day and at nightFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design
License plate light W5W (lamp)
License plate light Spare parts for KH 1000, W5W (lamp), E1 license ECE-tested
Bullet 1000® Extreme
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. Bullet 1000 DF The Bullet 1000® DF is a rear indicator in combination with a rear and brake light function. It replaces the existing indicators, brake and rear light. The light of the continuously glowing red rings give the tail of the motorcycle a spectacular look**. When breaking, the light circle of the brake light shines strong and clear, the clear message to the following traffic is: Keep your distance. The Bullet 1000® DF at the tail and the Bullet 1000® PL, Bullet 1000® PL white or Bullet 1000® Extreme in the front are the perfect combination for your motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
Bullet 1000® PL white
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. Bullet 1000® PL white The Bullet 1000® PL white is an indicator with an integrated position light in the shape of a continuous white light ring. Together with the main light they boost the safety features of the bike.The Bullet 1000® PL white has a unique feature: Once the indicator is activated the position light is temporarily switched off to allow the indictor to be even more visible. Shortly after the indicator stops the position light is activated again. As the Bullet 1000® Extreme so does the Bullet 1000® PL white offer the LED typical fast response** combined with Bullet typical soft response of the inner light section. Alltogether a harmonic indicator performance that blends in with the great overall look and feel of this amazing product. The position lights can be mounted either on the original position light base or connected to the dashboard light of the motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of improved visibility Replaces the existing position light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
Adapter for other indicators M 10
Adapter for other indicators Sapre parts for KH 1000 With M10 threaded
Rhombus Extreme
A talented edge Our innovative indicator-brake-rear light combination maximizes your individual styling option at the rear of your bike! Optically fully disguised due to its reduction in size and an all-rounder at the same time: The original tail light can be eliminated and replaced by beaming double rear lights based on high-performance LEDs and the Kellermann HighPower LED Technology.** Inconspicuous at rest, unbeatable in action: The brake light of the Rhombus S DF Dark warns with an intensity that is second to none. It keeps the following traffic at distance, thus enhancing safety on the road. As the complete electronics are in the casing the Rhombus S DF Dark allows for a significant reduction in weight. Suitable for all motorcycle models.* * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5 x 0,5 x 6,5 mm thread European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Jetstream® DF
Jetstream® The Kellermann Jetstream® is probably the most spectacular motorcycle indicator ever build. The shape is extremely aerodynamic and therefore also at high speeds very streamlined. No other motorcycle indicator with sequential lighting and ECE approval gets even close, the brightness of the Kellermann Jetstream® is unmatched. In the 3in1 version the equally strong rear and brake lights are added, the well-proven Atto® technology is placed in the jet engine channel. Recommended accessory: i.SED - Performance | 123.968 ECE-geprüft for front and rear Highest illuminating power Kellermann high power LED technology State-of-art „IC“- chip technology 32 MHz real time micro processor controlled Silent-Current, advanced Power Saving algorithm High measure of visibility across a wide angle range Longlife Protection Guard® Suitable for 12 volt DC applications Flow-optimized metal housing, high quality manufacturing M8 x 20mm thread High-quality vibration-absorbing bearing Global design protection
Dayron® i Innovation, extension arm
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
micro 1000® Extreme
All-rounder The micro 1000 Extreme is one of the brightest Kellermann indicator of all-time. It is highly versatile and is the first Kellermann indicator that can be used in multiple applications including quads, cars and trailers (homologated according to ECE-R6). The micro 1000 Extreme can be installed within 20 mm to the main headlamp. Kellermann HighPower LED Technology** uses two LEDs producing an extraordinarily bright indicator. Due to this greater illumination it is recognized much more quickly in traffic providing for maximum road safety*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for front and rear Applicable on all vehicles(e. g. motorcycles, quads, cars, Super Seven, trailers, etc.) Extreme light power Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 thread Replaceable flexible rubber adapter protects the indicator from vibration damage and vandalism
Dash M
The extremely bright dashboard indicators! Almost invincible when turned off, but unbeatable in action: Thanks to the mounting position under the handlebars, the new Dash indicators virtually disappear visually at the front of the motorcycle. At the same time, the Kellermann Dash indicators offer maximum brightness with minimum size. This means that the credo of Kellermann's compact indicators now also applies to the new generation of dashboard indicators: "sensationally small - spectacularly bright". The optimized light control of the new Dash family is also achieved by a sophisticated system of lenses and reflectors. The Kellermann HighPower LED** and EXtranz® - Extreme Optical Transparency technology are used here.The complete electronics of the Dash M Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-testedfor front sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
BL 1000 LED
New, and already a classic The BL 1000 LED is the latest development in handlebar end indicators. Our specially control technology**, the modern high-performance-LEDs and the innovative clear glass look meanperformance as well as beautifully proportioned styling at the end of the handlebar. The BL 1000 LED combines function with handlebar vibration damping. All necessary adapters are supplied for mounting on to most model handlebars*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of brightness and direct response of LEDs Handlebar vibration damping function Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
Bullet 1000® RB
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
Dayron® Innovation, U Adapter
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
Dayron® i Classic, extension arm
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT