Bullet 1000® Extreme
€109.95
Available, delivery time: 1-3 days
Product information "Bullet 1000® Extreme"
Classic meets Hightech
The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light.
Bullet 1000 DF
The Bullet 1000® DF is a rear indicator in combination with a rear and brake light function. It replaces the existing indicators, brake and rear light. The light of the continuously glowing red rings give the tail of the motorcycle a spectacular look**. When breaking, the light circle of the brake light shines strong and clear, the clear message to the following traffic is: Keep your distance. The Bullet 1000® DF at the tail and the Bullet 1000® PL, Bullet 1000® PL white or Bullet 1000® Extreme in the front are the perfect combination for your motorcycle.*
* Electrical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction.
ECE-tested for rear
- Replaces the existing brake/rear light as well as the indicator
- Special flashing effect
- Unique and homogeneous light ring
- Extreme light power
- HPT®- Homogenous Projection Technology
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- High quality metal housing
- Suitable for 12 volt DC applications
- With M8 x 20 fastening screw
- European design protection
| DC on-board power supply: | 12 V |
|---|---|
| ECE-type approval: | Motorcycles |
| Functional features: | Indicator |
| Length (without thread/fastening): | 50 mm |
| Lens colour: | clear |
| Mounting: | mounted indicator |
| Mounting thread: | M8 x 20 mm |
| Position: | front & rear |
| Produktlisting-Features: | Indicator |
| Technology: | LED |
| Ø max.: | 39 mm |
Montagezubehör
Bulb holder evo for micro 1000® Halogen (from 2004)
Mounting Plates 123.753 used for:Italian Motorcycles (Ducati, Moto Guzzi, usw.)
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
Elektronisches Zubehör
Micro relay for the pros The R 1 flasher relay has very small dimensions and flashes independently of load at a steady 75 pulses per minute. It also has a connection available for the flasher dashboard light. It is easily installed into the feed to the indicator switch, or can be swapped with the original 2-3 pole flasher relay. It is therefore suitable for all motorcycles with indicator switches. Should the change to LED indicators result in the non-intentionally activated indicators also flashing; then the indicator control light must also be connected to the R 1 relay. The ‘hazard warning’ effect will then be effectively All necessary components required for installation are included. ECE-tested Simple installation in feed to the indicator switch or swap the original 2-3 pole flasher relay Connection to indicator control light also possible Restricts the accompanying flashing of non-activated indicators Load-independent / steady flash rate Switching capacity 0-50W by 12V/ 0-24W by 6V Very small dimensions 22 x12 x 6 mm (L/W/H) Suitable for indicator switches Suitable for 6 and 12 volt DC applications
i.BOS - CL1 Serves as a quick fix for inaccurate cockpit displays The i.BOS systems (intelligent boxing operation system) provide a quick fix, if after the installation of the indicator the control light flashes too quick or other control lights in the cockpit function inaccurately. i.BOS - CL1 provides correct function of the control and hazard light, e.g. when using DF versions for Harley Davidson models with HD-LAN. *Additionally and on case by case the option "LED indicator" has to be activated in the software. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, break light)
i.BOS - EL1 Serves as a quick fix for inaccurate cockpit displays The i.BOS systems (intelligent boxing operation system) provide a quick fix, if after the installation of the indicator the control light flashes too quick or other control lights in the cockpit function inaccurately. i.BOS - EL1 provides correct function of the hazard light, e.g. when using DF versions. *Additionally and on case by case the option "LED indicator" has to be activated in the software. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, light)
i.SED V12 suitable for vehicles with 12 volt indicator application For example when mounting indicators with higher wattage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual „DF“ products on vehicles where the indicators ground is switched but not the plus as usual
i.SED V6 suitable for vehicles with 5-9 volt indicator application For example when mounting indicators with higher wattage than original indicators with higher voltage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual
Posi-Lock cable connector splash water connections. The cable is connection between seconds, without soldering.
Content: 9 Piece(s) (€1.44 / 1 Piece(s))
Posi-Lock cable connector MINI Splash water connections The cable is connection between seconds, without soldering
Content: 5 Piece(s) (€1.99 / 1 Piece(s))