Mounting accessories
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
i.NEX - Connector set 152
i.NEX - Connector set 152Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3in1 lightsBreakoutSlim
i.NEX - Connector set 160
i.NEX - Connector set 160 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2018 (front Indicator)
Mounting Plates for Kawasaki ISK1
Mounting Plates 123.755 used for:KawasakiKLE 500 front/rearZX 6R '98-02 front/rearZX 6RR '03 front/rearZR7 S/R '03 front/rearZX 7R '96 front/rearZ750/Z1000 '03 front/rearZX 9R '98 front/rearZX 12R '00-02 rearZRX 1200S '03 front/rear
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
Mounting Plates
Mounting plate B3 Suitable for:JetstreamBMW R 1300 GSFrontBMW R 1250 GSfront and rearWith the help of the long nut, the Jetstream can be optimally mounted using an open-end wrench. The long nut provides sufficient contact surface for an open-end wrench.
Content: 2 Piece(s) (€14.98 / 1 Piece(s))
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
i.NEX - Connector set 161
i.NEX - Connector set 161Vehicle-specific plug & play set for connecting the i.NEX consisting of four adapter cables with matching plug, two extension cables and cable connectors. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2018 (rear 3in1)
Posi-Lock Cable Connector
Posi-Lock cable connector splash water connections. The cable is connection between seconds, without soldering.
Content: 5 Piece(s) (€1.99 / 1 Piece(s))
Mounting Plates B4
Mounting plate B4suitable for:BMW R 1300 GS for rear M8 M8 thread
Content: 2 Piece(s) (€14.98 / 1 Piece(s))
Reflektor 100 x 13 mm
Reflector for KH 2000 Measure: 100 x 13 mm with M5 thread bolt
i.NEX - Connector set 153
i.NEX - Connector set 153Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3indicatorPan AmericaPan America Special
Mounting plate 174mm
Atto® mounting plate 174mm for mounting Atto® indicators at small license plate holders
i.NEX - Connector set 151
i.NEX - Connector set 151Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3in1 lightsSporster
Ball head adapter
Ball head adapter Spare parts for micro and Rhombus series
i.NEX - Connector set 144
i.NEX - Connector set 144Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Honda indicatorVFR 800X Crossrunner MJ 2018
Reflektor 123 x 12,5 mm
Reflector 123 x 12,5 mm Measure: 123 x 12,5 mm with M5 thread bolt
Bullet 1000® Adapter HD
Bullet Adapter HD After the Bullet 1000 series enjoys great popularity, many Harley riders wish to replace their original turn signals against the Bullet 1000 and thereby continue to use the front fasteners on the handlebars. To allow for unobtrusive cable routing, the adapter is a two-piece design that screws between the original handlebar mounts and the Bullet 1000. For the assembly between Bullet 1000 and the Bullet 1000 Adapter HD it is necessary to dismantle the original foot of the turn signal. Attention, do not damage the cables during disassembly! The original foot is screwed onto the turn signal body with a regular metric right-hand thread. two-piece design inconspicuous cable routing
Rigid mounting M8 x 40 HD
Rigid Mounting Spare parts for micro and Rhombus series M8 x 40
Bullet 1000® Adapter HD
Bullet Adapter HD After the Bullet 1000 series enjoys great popularity, many Harley riders wish to replace their original turn signals against the Bullet 1000 and thereby continue to use the front fasteners on the handlebars. To allow for unobtrusive cable routing, the adapter is a two-piece design that screws between the original handlebar mounts and the Bullet 1000. For the assembly between Bullet 1000 and the Bullet 1000 Adapter HD it is necessary to dismantle the original foot of the turn signal. Attention, do not damage the cables during disassembly! The original foot is screwed onto the turn signal body with a regular metric right-hand thread. two-piece design inconspicuous cable routing
i.NEX - Connector set 191
i.NEX - Connector set 191Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (rear indicators)
Mounting Plates for Yamaha ISY2
Mounting Plates 123.757 used for:YamahaFZ6 Fazer '04 front/rearYZF R6 '03 front/rearTDM 900 '02 front/rearYZF R1 '02 front/rear
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
i.NEX - Connector set 162
i.NEX - Connector set 162Vehicle-specific plug & play set for connecting the i.NEX consisting of a adapter cables with matching plug. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2015 (rear 3in1)