Mounting accessories
Adapter plate handlebar HD
Atto® adapter plate handlebar HD for handlebar mounting of Atto® indicators at brake and clutch hand gearNote: Suitable for HD models with hydraulic clutch operation. Not suitable for HD models with Bowden cable clutch operation.
Content: 2 Piece(s) (€8.98 / 1 Piece(s))
Mounting plate 174mm
Atto® Montageblech 174mm Zur Montage von Atto® Blinkern an kurzen Kennzeichen
Mounting plate 174mm
Atto® mounting plate 174mm for mounting Atto® indicators at small license plate holders
Mounting plate 174mm
Atto® mounting plate 174mm for mounting Atto® indicators at small license plate holders
Mounting plate 174mm
Atto® mounting plate 174mm for mounting Atto® indicators at small license plate holders
Rigid mounting M10 x 20mm
Atto® rigid mounting M10 x 20mm, black for use with original 10mm bore
Rigid mounting M8 x 40mm
Atto® rigid mounting M8 x 40mm, black for use with original 8mm bore
Rigid mounting M8 x 20mm
Atto® rigid mounting M8 x 20mm, black for use with original 8mm bore
Silent rubber adapter KH 1000
Silent rubber adapter KH 1000 Spare part for KH 1000 Length: 10 mm, with M8 thread
License plate illumination
License plate illumination Spare parts for KH 1000 series Height: 29 mm Breadth: 54 mm Height: 46 mm
Reflector 90x30 mm
Reflektor for KH 1000 Spare parts Measure: 90 x 30 mm, with M5 thread bolt
Adapter for other indicators M 10
Adapter for other indicators Sapre parts for KH 1000 With M10 threaded
Reflektor 100 x 13 mm
Reflector for KH 2000 Measure: 100 x 13 mm with M5 thread bolt
Reflektor 123 x 12,5 mm
Reflector 123 x 12,5 mm Measure: 123 x 12,5 mm with M5 thread bolt
License plate light W5W (lamp)
License plate light Spare parts for KH 1000, W5W (lamp), E1 license ECE-tested
Bullet 1000® Adapter HD
Bullet Adapter HD After the Bullet 1000 series enjoys great popularity, many Harley riders wish to replace their original turn signals against the Bullet 1000 and thereby continue to use the front fasteners on the handlebars. To allow for unobtrusive cable routing, the adapter is a two-piece design that screws between the original handlebar mounts and the Bullet 1000. For the assembly between Bullet 1000 and the Bullet 1000 Adapter HD it is necessary to dismantle the original foot of the turn signal. Attention, do not damage the cables during disassembly! The original foot is screwed onto the turn signal body with a regular metric right-hand thread. two-piece design inconspicuous cable routing
Bullet 1000® Adapter HD
Bullet Adapter HD After the Bullet 1000 series enjoys great popularity, many Harley riders wish to replace their original turn signals against the Bullet 1000 and thereby continue to use the front fasteners on the handlebars. To allow for unobtrusive cable routing, the adapter is a two-piece design that screws between the original handlebar mounts and the Bullet 1000. For the assembly between Bullet 1000 and the Bullet 1000 Adapter HD it is necessary to dismantle the original foot of the turn signal. Attention, do not damage the cables during disassembly! The original foot is screwed onto the turn signal body with a regular metric right-hand thread. two-piece design inconspicuous cable routing
Rigid mounting M8 x 40 HD
Rigid Mounting Spare parts for micro and Rhombus series M8 x 40
Rigid mounting M8 x 40 HD
Rigid Mounting Spare parts for micro and Rhombus series M8 x 40
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20