Elektronik
i.NEX V4
Kellermann i.NEX: One for all! All indicators, all motorcyclesNo more conversion stress - i.NEX is the all-rounderThe Kellermann i.NEX now makes converting motorcycle lights as easy as possible.Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.When things need to be simple - the i.NEX puts an end to the despair of the mechanic and incalculable hours of work in the workshop! Motorcycle electronics are becoming more complex every year, making the installation of retrofittable lights increasingly time-consuming and nerve-wracking. It is often not clear which accessories are required for the conversion or what problems can arise during the conversion. The solution: Kellermann i.NEX - the box that can do everything!The i. NEX can be used to connect up to four indicators as well as a rear light, brake light and position light. The i.NEX series also offers connection accessories with matching connector and cable sets. This makes conversion simple and effective.Small effort, big effect - the lights are connected directly to the i. NEX. The i.NEX is set according to the requirements of the on-board electronics using rotary switches. No matter which light, no matter which motorcycle - only the Kellermann i.NEX can do it!Kellermann i.NEX - Always the right choice - error messages in the cockpit, incorrect flashing frequency of indicators and indicator control lights as well as disturbing idle currents are now a thing of the past.In addition, the i.NEX series offers the solution for various requirements, e.g. when fitting indicators with higher power consumption or higher voltage than original as well as original minus-switched indicators.Kellermann i.NEX - Complicated becomes simple!i. NEX at a glance:Electronic universal solution for motorcycle lights such as indicators, rear/brake light and position lightCompatible with classic bikes, new models and modern operating systemsCorrect flashing frequencyNo error messages in the cockpitNo disruptive quiescent currentsInstallation of indicators with higher power consumption [watts] than originalInstallation of indicators with lower power consumption [watts] than originalInstallation on motorcycles with minus-switched indicatorsTechnical information: The i.NEX - V4 is suitable for standard 3-4 volt lights up to 10 watts total power of the functions to be replacedCalculation: Constant lights: Full power / indicators: Half power Example: Tail light 1W + brake light 3W + blinker 3W (1.5W) + blinker 3W (1.5W) = 7W The volts and watts are specified on the lenses of the standard lights. A different product is required in the following cases: 21 watt indicators i.LOAD - IL 7,5 – one piece per indicatorAlternatively: If a manual 2-3 pole indicator relay is fitted to the vehicle as standard (optional) Blinkrelais R1 – one piece per vehicle Blinkrelais R2 – one piece per vehicle 5-9 Volt lights / on-board voltage 12 Volt i.NEX - V8 12 Volt lights / on-board voltage 12 Volti.NEX - V12 A customized solution is required in the following cases: Email to customer service Main headlights, daytime running lights, fog lights US vehicles >12 Volt on-board voltage
i.BOS - CL1
i.BOS - CL1 Serves as a quick fix for inaccurate cockpit displays The i.BOS systems (intelligent boxing operation system) provide a quick fix, if after the installation of the indicator the control light flashes too quick or other control lights in the cockpit function inaccurately. i.BOS - CL1 provides correct function of the control and hazard light, e.g. when using DF versions for Harley Davidson models with HD-LAN. *Additionally and on case by case the option "LED indicator" has to be activated in the software. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, break light)
i.NEX - Connector set 122
i.NEX - Connector set 122Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables. The set is suitable for the following motocycle models: BMW (rear 3in1 lights)R 1300 GS R 1300 GS Adventure R 1250 GS R 1250 GS Adventure R 12 R 12 nineT 2023 - R nineT 2017 - R nineT Pure R nineT Scrambler R nineT Urban G/S R 18 2020 - R 18 Classic CE 04 S 1000 XR 2024 - S 1000 XR 2020 - 2023 S 1000 R 2021 - M 1000 XR M 1000 RR 2023 - M 1000 R 2023 - M 1000 RR 2021 - 2022 S 1000 RR 2019 -
i.NEX - Connector set 161
i.NEX - Connector set 161Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2018 (rear 3in1)
i.SED - Performance
i.SED - Performance i.SED - This performance accessory secures a continuous power supply only when the ignition is switched on. Any quiescent currents will be eliminated. Suitable for all products with particularly high power, e.g. Jetstream indicator, Jetstream DF and Dayron PL. Easy installation Continuous power supply only when ignition is switched on Ilimination of quiescent currents Trouble free operation of all Kellermann Jetstream products
i.NEX - Connector set 120
i.NEX - Connector set 120 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: BMW indicatorR nine T 2018 R 1300 GSR 1300 GS AdventureR 1250 GSR 1250 GS AdventureR 1200 GS LC 2013 - 2016R 1200 GS LC - 2017R 1200 GS LC Adv. ab 2014R 1200 GS 2008 - 2009R 1200 GS 2010 - 2012R 1200 GS - 2007R 1200 GS Adv. 2008 - 2009R 1200 GS Adv. 2010 - 2013R 1200 GS Adv. -2007R 1250 R 2019-2022R 1200 R LCR 1200 R 2011 - 2014R 1200 R - 2010R 1250 RS 2019 - 2022R 1200 RS LCR 12R 12 nineT 2023R nineT 2014 - 2016R nineT 2017 - 2024R nineT /5R nineT PureR nineT RacerR nineT ScramblerR nineT Urban G/SHP2-SportF 900 GS ADV 2023 - F 900 GS 2023 -F 900 XRF 900 RF 850 GS 2018 -F 850 GS Adv 2019 -F 800 GS 2023 -F 800 GS 08/2012 - 2016F 800 GS - 07/2012F 800 GS 2017 - 2018F 800 GS Adventure 2013 -F 750 GS 2018 -F 700 GS - 2016F 700 GS 2017 -F 800 R 2015 -F 800 R - 2011F 800 R 2012 - 2014F 800 SF 800 STF 800 GTF 650 GS 2008 -K 1300 RK 1300 SK 1200 RK 1200 SK 1200 R SportS 1000 XR - 2019S 1000 R 2017 - 2020S 1000 R 2014 - 2016S 1000 RR 2015 - 2016S 1000 RR 2017 - 2018S 1000 RR 2012 - 2014S 1000 RR - 2011
i.NEX - Connector set 152
i.NEX - Connector set 152Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3in1 lightsBreakoutSlim
i.NEX - Cable set MO
i.NEX - Cable set MOExtension set i.NEX input - 2 x 2-core, 2 m
i.NEX - Cable set KE
i.NEX - Cable set KEExtension set i.NEX output - 2 x 5-core, 2 m
i.NEX - Connector set 144
i.NEX - Connector set 144Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Honda indicatorVFR 800X Crossrunner MJ 2018
i.NEX - Connector set 190
i.NEX - Connector set 190Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (front indicators)
i.NEX - Connector set 142
i.NEX - Connector set 142Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Honda indicatorCRF1000L Africa Twin MJ 2018 CBR1000RR Fireblade MJ 2017
i.LOAD - IL 27
i.LOAD - IL 27 Usage for Kellermann LED turn signal with original 10 watt turn signals - 1 piece per turn signal. When installing new indicators the flashing rate of the indicator or the control light may increase. Load independent relays (e.g. R2) or multifunctional assistance systems (e.g. CR4®) can fix the problem. If the installation is not possible or favored ,an i.LOAD can also fix the problem.
i.NEX - Connector set 151
i.NEX - Connector set 151Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3in1 lightsSporster
i.NEX - Connector set 124
i.NEX - Connector set 124Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables. The set is suitable for the following motocycle models: BMW (rear 3in1 lights)BMW R nine T 214 -2017 R NineT 2017 - 2021 R18 MJ 2020/21
i.LOAD - IL 10
i.LOAD - IL 10 Usage of micro 1000® Halogen indicators instead of original 21 watt indicators - 1 piece per indicator When installing new indicators the flashing rate of the indicator or the control light may increase. Load independent relays (e.g. R2) or multifunctional assistance systems (e.g. CR4®) can fix the problem. If the installation is not possible or favored ,an i.LOAD can also fix the problem.
i.LOAD - IL 1
i.LOAD - IL 1 Usage of Kellermann LED indicators instead of original LED indicators (12v) - 1 set for 2 indicators (front or rear) Provides correct function of the indicator control light, e. g. Harley Davidson with HD LAN. When installing new indicators the flashing rate of the indicator or the control light may increase. Load independent relays (e.g. R2) or multifunctional assistance systems (e.g. CR4®) can fix the problem. If the installation is not possible or favored ,an i.LOAD can also fix the problem.
i.LOAD - IL 7,5
i.LOAD - IL 7,5 Usage for Kellermann LED turn signal with original 21 watt turn signals - 1 piece per turn signal. When installing new indicators the flashing rate of the indicator or the control light may increase. Load independent relays (e.g. R2) or multifunctional assistance systems (e.g. CR4®) can fix the problem. If the installation is not possible or favored ,an i.LOAD can also fix the problem.
i.NEX - Connector set 121
i.NEX - Connector set 121Vehicle-specific plug & play set for connecting the i.NEX consisting of three adapter cables. The set is suitable for the following motocycle models: BMW R nine T 2018 (rear 3in1 lights)
i.NEX - Connector set 140
i.NEX - Connector set 140 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: CB1000R Neo Sports Café MJ 2018 (front indicator) CB650R Neo Sports Café MJ 2019 (front indicator)
Flasher Relay R1
Micro relay for the pros The R 1 flasher relay has very small dimensions and flashes independently of load at a steady 75 pulses per minute. It also has a connection available for the flasher dashboard light. It is easily installed into the feed to the indicator switch, or can be swapped with the original 2-3 pole flasher relay. It is therefore suitable for all motorcycles with indicator switches. Should the change to LED indicators result in the non-intentionally activated indicators also flashing; then the indicator control light must also be connected to the R 1 relay. The ‘hazard warning’ effect will then be effectively All necessary components required for installation are included. ECE-tested Simple installation in feed to the indicator switch or swap the original 2-3 pole flasher relay Connection to indicator control light also possible Restricts the accompanying flashing of non-activated indicators Load-independent / steady flash rate Switching capacity 0-50W by 12V/ 0-24W by 6V Very small dimensions 22 x12 x 6 mm (L/W/H) Suitable for indicator switches Suitable for 6 and 12 volt DC applications
i.NEX - Connector set 110
i.NEX - Connector set 110 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Aprilia Tuono V4 1100 Factory MJ 2017 -2019 (front indicators)
i.NEX - Connector set 175
i.NEX - Connector set 175Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: MV Agusta Blinker 800 Brutalle RR MJ 2018
i.NEX - Connector set 191
i.NEX - Connector set 191Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (rear indicators)