i.NEX V4
Article number: 111.170
€149.95*
(1 Piece(s))
Standard Delivery: 1-3 days Express: delivery available
- Installation safety & guidance by phone, email or web chat
- Free shipping from 70 € (DE)
- All lighting products are ECE approved and can be installed directly without additional approval
Kellermann i.NEX: One for all!
All indicators, all motorcycles
No more conversion stress - i.NEX is the all-rounder
The Kellermann i.NEX now makes converting motorcycle lights as easy as possible.
Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.
Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.
When things need to be simple - the i.NEX puts an end to the despair of the mechanic and incalculable hours of work in the workshop! Motorcycle electronics are becoming more complex every year, making the installation of retrofittable lights increasingly time-consuming and nerve-wracking. It is often not clear which accessories are required for the conversion or what problems can arise during the conversion. The solution: Kellermann i.NEX - the box that can do everything!
The i. NEX can be used to connect up to four indicators as well as a rear light, brake light and position light. The i.NEX series also offers connection accessories with matching connector and cable sets. This makes conversion simple and effective.
Small effort, big effect - the lights are connected directly to the i. NEX. The i.NEX is set according to the requirements of the on-board electronics using rotary switches. No matter which light, no matter which motorcycle - only the Kellermann i.NEX can do it!
Kellermann i.NEX - Always the right choice - error messages in the cockpit, incorrect flashing frequency of indicators and indicator control lights as well as disturbing idle currents are now a thing of the past.In addition, the i.NEX series offers the solution for various requirements, e.g. when fitting indicators with higher power consumption or higher voltage than original as well as original minus-switched indicators.
Kellermann i.NEX - Complicated becomes simple!
i. NEX at a glance:
- Electronic universal solution for motorcycle lights such as indicators, rear/brake light and position light
- Compatible with classic bikes, new models and modern operating systems
- Correct flashing frequency
- No error messages in the cockpit
- No disruptive quiescent currents
- Installation of indicators with higher power consumption [watts] than original
- Installation of indicators with lower power consumption [watts] than original
- Installation on motorcycles with minus-switched indicators
Technical information:
- The i.NEX - V4 is suitable for standard
- 3-4 volt lights
- up to 10 watts total power of the functions to be replaced
Calculation: Constant lights: Full power / indicators: Half power
Example: Tail light 1W + brake light 3W + blinker 3W (1.5W) + blinker 3W (1.5W) = 7W
A different product is required in the following cases:
- 21 watt indicators
i.LOAD - IL 7,5 – one piece per indicator - Alternatively: If a manual 2-3 pole indicator relay is fitted to the vehicle as standard (optional)
Blinkrelais R1 – one piece per vehicle
Blinkrelais R2 – one piece per vehicle
- 5-9 Volt lights / on-board voltage 12 Volt
i.NEX - V8 - 12 Volt lights / on-board voltage 12 Volt
i.NEX - V12
A customized solution is required in the following cases: Email to customer service
- Main headlights, daytime running lights, fog lights
- US vehicles
- >12 Volt on-board voltage
| Dimensions: | 83 x 60 x 12 mm |
|---|---|
| Produktlisting-Features: | i.NEX - V4 Die elektronische Universallösung für Motorradleuchten mit 3 - 4V! |
| Standard voltage of the lights: | 3 - 4 V |
Downloads "i.NEX V4"
Kellermann i.NEX: One for all!
All indicators, all motorcycles
No more conversion stress - i.NEX is the all-rounder
The Kellermann i.NEX now makes converting motorcycle lights as easy as possible.
Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.
Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.
When things need to be simple - the i.NEX puts an end to the despair of the mechanic and incalculable hours of work in the workshop! Motorcycle electronics are becoming more complex every year, making the installation of retrofittable lights increasingly time-consuming and nerve-wracking. It is often not clear which accessories are required for the conversion or what problems can arise during the conversion. The solution: Kellermann i.NEX - the box that can do everything!
The i. NEX can be used to connect up to four indicators as well as a rear light, brake light and position light. The i.NEX series also offers connection accessories with matching connector and cable sets. This makes conversion simple and effective.
Small effort, big effect - the lights are connected directly to the i. NEX. The i.NEX is set according to the requirements of the on-board electronics using rotary switches. No matter which light, no matter which motorcycle - only the Kellermann i.NEX can do it!
Kellermann i.NEX - Always the right choice - error messages in the cockpit, incorrect flashing frequency of indicators and indicator control lights as well as disturbing idle currents are now a thing of the past.In addition, the i.NEX series offers the solution for various requirements, e.g. when fitting indicators with higher power consumption or higher voltage than original as well as original minus-switched indicators.
Kellermann i.NEX - Complicated becomes simple!
i. NEX at a glance:
- Electronic universal solution for motorcycle lights such as indicators, rear/brake light and position light
- Compatible with classic bikes, new models and modern operating systems
- Correct flashing frequency
- No error messages in the cockpit
- No disruptive quiescent currents
- Installation of indicators with higher power consumption [watts] than original
- Installation of indicators with lower power consumption [watts] than original
- Installation on motorcycles with minus-switched indicators
Technical information:
- The i.NEX - V4 is suitable for standard
- 3-4 volt lights
- up to 10 watts total power of the functions to be replaced
Calculation: Constant lights: Full power / indicators: Half power
Example: Tail light 1W + brake light 3W + blinker 3W (1.5W) + blinker 3W (1.5W) = 7W
A different product is required in the following cases:
- 21 watt indicators
i.LOAD - IL 7,5 – one piece per indicator - Alternatively: If a manual 2-3 pole indicator relay is fitted to the vehicle as standard (optional)
Blinkrelais R1 – one piece per vehicle
Blinkrelais R2 – one piece per vehicle
- 5-9 Volt lights / on-board voltage 12 Volt
i.NEX - V8 - 12 Volt lights / on-board voltage 12 Volt
i.NEX - V12
A customized solution is required in the following cases: Email to customer service
- Main headlights, daytime running lights, fog lights
- US vehicles
- >12 Volt on-board voltage
Downloads "i.NEX V4"
| Dimensions: | 83 x 60 x 12 mm |
|---|---|
| Produktlisting-Features: | i.NEX - V4 Die elektronische Universallösung für Motorradleuchten mit 3 - 4V! |
| Standard voltage of the lights: | 3 - 4 V |