Made in Germany
installation safety
Free shipping from 70 € (DE)
Made in Germany
installation safety
Free shipping from 70 € (DE)

Flasher Relay R2

Motorrad Blinkrelais, lastunabhängig, 2-3 polig
Article number: 123.970

€34.95*

(1 Piece(s))
Standard Delivery: 1-3 days Express: delivery available
Vehicle brand
  • Installation safety & guidance by phone, email or web chat
  • Free shipping from 70 € (DE)
  • All lighting products are ECE approved and can be installed directly without additional approval
MadeInGermany

The Classic

The load-independent R2 flasher relay is the universal problem solver when using LED and halogen indicators. It replaces all original 2-3 pole flasher relays and delivers a constant and correct flashing frequency. Connection is simple. If following the conversion to LED indicators, the non-activated indicators also flash, then all that is required is for the relay to be connected to a left and a right indicator in order to reliably cure this problem*. All necessary components required for installation are included. * In certain cases the hazard warning flasher facility must be deactivated.

ECE-tested

  • Replaces the original 2-3 pole flasher relay
  • Restricts the accompanying flashing of non-activated indicators
  • Load-independent / usual flash rate
  • Switching capacity 0,5-85 watt
  • Small dimensions 34 x 22 x12 [mm] (L/W/H)
  • High quality metal housing
  • Suitable for indicator switches
  • Suitable for 12 volt DC applications
Downloads " Flasher Relay R2"

The Classic

The load-independent R2 flasher relay is the universal problem solver when using LED and halogen indicators. It replaces all original 2-3 pole flasher relays and delivers a constant and correct flashing frequency. Connection is simple. If following the conversion to LED indicators, the non-activated indicators also flash, then all that is required is for the relay to be connected to a left and a right indicator in order to reliably cure this problem*. All necessary components required for installation are included. * In certain cases the hazard warning flasher facility must be deactivated.

ECE-tested

  • Replaces the original 2-3 pole flasher relay
  • Restricts the accompanying flashing of non-activated indicators
  • Load-independent / usual flash rate
  • Switching capacity 0,5-85 watt
  • Small dimensions 34 x 22 x12 [mm] (L/W/H)
  • High quality metal housing
  • Suitable for indicator switches
  • Suitable for 12 volt DC applications
Downloads " Flasher Relay R2"