Elektronik
i.BOS - EL 33
i.BOS - EL 33 The i.BOS systems provide a quick fix, if after the installation of DF versions control lights in the cockpit function inaccurately. When changing the original indicators to LED or Halogen the indicating frequency is automatically altered. This is adjusted for parallel switched power resistors. The right selection of the suitable power resistors is listed in the table below. If you are not sure which resistor you need, please don’t hesitate to contact us via the contact form (Technical Dept) on our homepage. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, brake light) One i.BOS - EL 33 parallel to the rear light and one i.LOAD - IL 7,5 parallel to the brake light are needed.
i.NEX - Connector set 192
i.NEX - Connector set 192Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (rear 3in1)
i.NEX - Connector set 160
i.NEX - Connector set 160 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2018 (front Indicator)
i.NEX - Connector set 162
i.NEX - Connector set 162Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2015 (rear 3in1)
i.NEX - Connector set 110
i.NEX - Connector set 110 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Aprilia Tuono V4 1100 Factory MJ 2017 -2019 (front indicators)
i.NEX - Connector set 153
i.NEX - Connector set 153Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3indicatorPan AmericaPan America Special
Flasher Relay R2 Typ K
The Classic The load-independent R2 flasher relay is the universal problem solver when using LED and halogen indicators. It replaces all original 2-3 pole flasher relays and delivers a constant and correct flashing frequency. Connection is simple. If following the conversion to LED indicators, the non-activated indicators also flash, then all that is required is for the relay to be connected to a left and a right indicator in order to reliably cure this problem*. With vehicle specific plug, suitable for many Kawasaki models. ECE-tested Replaces the original 2-3 pole flasher relay Restricts the accompanying flashing of non-activated indicators Load-independent / steady flash rate Switching capacity 0,5-85 watt Small dimensions 34x22x12 [mm] (L/W/H) High quality metal housing Suitable for indicator switches Suitable for 12 volt DC applications
i.BOS - EL1
i.BOS - EL1 Serves as a quick fix for inaccurate cockpit displays The i.BOS systems (intelligent boxing operation system) provide a quick fix, if after the installation of the indicator the control light flashes too quick or other control lights in the cockpit function inaccurately. i.BOS - EL1 provides correct function of the hazard light, e.g. when using DF versions. *Additionally and on case by case the option "LED indicator" has to be activated in the software. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, light)
i.NEX - Connector set 150
i.NEX - Connector set 150Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3in1 lightsSoftail from 2016 (except FLSTC & FLSTN)
Flasher Relay R2
The Classic The load-independent R2 flasher relay is the universal problem solver when using LED and halogen indicators. It replaces all original 2-3 pole flasher relays and delivers a constant and correct flashing frequency. Connection is simple. If following the conversion to LED indicators, the non-activated indicators also flash, then all that is required is for the relay to be connected to a left and a right indicator in order to reliably cure this problem*. All necessary components required for installation are included. * In certain cases the hazard warning flasher facility must be deactivated. ECE-tested Replaces the original 2-3 pole flasher relay Restricts the accompanying flashing of non-activated indicators Load-independent / usual flash rate Switching capacity 0,5-85 watt Small dimensions 34 x 22 x12 [mm] (L/W/H) High quality metal housing Suitable for indicator switches Suitable for 12 volt DC applications
i.SED V6
i.SED V6 suitable for vehicles with 5-9 volt indicator application For example when mounting indicators with higher wattage than original indicators with higher voltage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual
i.SED V12
i.SED V12 suitable for vehicles with 12 volt indicator application For example when mounting indicators with higher wattage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual „DF“ products on vehicles where the indicators ground is switched but not the plus as usual