Electronic accessories
i.NEX - Connector set 144
i.NEX - Connector set 144Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Honda indicatorVFR 800X Crossrunner MJ 2018
Technikset - BMW R 1250 GS MY18-23 - LED 6-polig M8 Adapter
Technikset - BMW R 1250 GS MY18-23 - LED 6-polig M8 Adapterfür alle Dayron® (ohne Blinker)
i.NEX - Connector set 191
i.NEX - Connector set 191Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (rear indicators)
i.NEX - Connector set 190
i.NEX - Connector set 190Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (front indicators)
Technicset i - Harley-Davidson Pan America 1250 MY23
Technicset i - Harley-Davidson Pan America 1250 MY23for all Dayron® I (with indicator)
i.NEX - Connector set 124
i.NEX - Connector set 124Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables. The set is suitable for the following motocycle models: BMW (rear 3in1 lights)BMW R nine T 214 -2017 R NineT 2017 - 2021 R18 MJ 2020/21
i.NEX - Cable set MO
i.NEX - Cable set MOExtension set i.NEX input - 2 x 5-core, 70 cm
i.NEX - Connector set 110
i.NEX - Connector set 110 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Aprilia Tuono V4 1100 Factory MJ 2017 -2019 (front indicators)
i.BOS - EL 33
i.BOS - EL 33 The i.BOS systems provide a quick fix, if after the installation of DF versions control lights in the cockpit function inaccurately. When changing the original indicators to LED or Halogen the indicating frequency is automatically altered. This is adjusted for parallel switched power resistors. The right selection of the suitable power resistors is listed in the table below. If you are not sure which resistor you need, please don’t hesitate to contact us via the contact form (Technical Dept) on our homepage. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, brake light) One i.BOS - EL 33 parallel to the rear light and one i.LOAD - IL 7,5 parallel to the brake light are needed.
i.NEX - Connector set 162
i.NEX - Connector set 162Vehicle-specific plug & play set for connecting the i.NEX consisting of a adapter cables with matching plug. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2015 (rear 3in1)
i.NEX - Connector set 110
i.NEX - Connector set 110 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Aprilia Tuono V4 1100 Factory MJ 2017 -2019 (front indicators)
i.NEX - V8 Die elektronische Universallösung für Motorradleuchten mit 5 - 9V!
Kellermann i.NEX: One for all! All indicators, all motorcyclesNo more conversion stress - i.NEX is the all-rounderThe Kellermann i.NEX now makes converting motorcycle lights as easy as possible.Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.When things need to be simple - the i.NEX puts an end to the despair of the mechanic and incalculable hours of work in the workshop! Motorcycle electronics are becoming more complex every year, making the installation of retrofittable lights increasingly time-consuming and nerve-wracking. It is often not clear which accessories are required for the conversion or what problems can arise during the conversion. The solution: Kellermann i.NEX - the box that can do everything!The i. NEX can be used to connect up to four indicators as well as a rear light, brake light and position light. The i.NEX series also offers connection accessories with matching connector and cable sets. This makes conversion simple and effective.Small effort, big effect - the lights are connected directly to the i. NEX. The i.NEX is set according to the requirements of the on-board electronics using rotary switches. No matter which light, no matter which motorcycle - only the Kellermann i.NEX can do it!Kellermann i.NEX - Always the right choice - error messages in the cockpit, incorrect flashing frequency of indicators and indicator control lights as well as disturbing idle currents are now a thing of the past.In addition, the i.NEX series offers the solution for various requirements, e.g. when fitting indicators with higher power consumption or higher voltage than original as well as original minus-switched indicators.Kellermann i.NEX - Complicated becomes simple!i. NEX at a glance:Electronic universal solution for motorcycle lights such as indicators, rear/brake light and position lightCompatible with classic bikes, new models and modern operating systemsCorrect flashing frequencyNo error messages in the cockpitNo disruptive quiescent currentsInstallation of indicators with higher power consumption [watts] than originalInstallation of indicators with lower power consumption [watts] than originalInstallation on motorcycles with minus-switched indicatorsTechnical information: The i.NEX - V8 is suitable for standard 5-9 volt lights up to 10 watts total power of the functions to be replacedCalculation: Constant lights: Full power / indicators: Half power Example: Tail light 1W + brake light 3W + indicator 3W (1.5W) + indicator 3W (1.5W) = 7W up to 20 watts total power of the functions to be replaced an i.NEX - AddOn 10 is also requiredExample: Tail light 3W + brake light 3W + indicator 10W (5W) + indicator 10W (5W) = 16W The volts and watts are specified on the lenses of the standard lights. A different product is required in the following cases: 21 watt indicators i.LOAD - IL 7,5 – one piece per indicatorAlternatively: If a manual 2-3 pole indicator relay is fitted to the vehicle as standard (optional) Blinkrelais R1 – one piece per vehicle Blinkrelais R2 – one piece per vehicle 12 Volt lights / on-board voltage 12 Volt i.NEX - V12 3-4 Volt lights / on-board voltage 12 Volti.NEX - V4 A customized solution is required in the following cases: Email to customer service Main headlights, daytime running lights, fog lights US vehicles >12 Volt on-board voltage
Dayron Installationsset H4
Universalanschlussset für die Dayron® Tagfahrlichtserie an Motorrädern mit H4 Singlescheinwerfer ohne vorhandenen Lichtschalter.
Technikset - BMW R 1250 GS MY18-23 - LED 4-polig
Technikset - BMW R 1250 GS MY18-23 - LED 4-poligfür alle Dayron® (ohne Blinker)
i.NEX - Connector set 142
i.NEX - Connector set 142Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Honda indicatorCRF1000L Africa Twin MJ 2018 CBR1000RR Fireblade MJ 2017
Technikset i - BMW R 1250 GS MY18-23 - LED 6-polig
Technikset i - BMW R 1250 GS MY18-23 - LED 6-poligfür alle Dayron® I (mit Blinker)
Technikset - BMW R nineT (mit Serien TFL) MY23
Technikset - BMW R nineT (mit Serien TFL) MY23 für alle Dayron® (ohne Blinker)
Technikset i - BMW R 1250 GS Adventure MY18-23 - LED 6-polig
Technikset i - BMW R 1250 GS Adventure MY18-23 - LED 6-polig für alle Dayron® I (mit Blinker)
Technikset i - BMW R 1250 GS MY18-23 - LED 6-polig M8-Adapter
Technikset i - BMW R 1250 GS MY18-23 - LED 6-polig M8-Adapterfür alle Dayron® I (mit Blinker)
Technikset - BMW R nineT (mit Serien TFL) MY23 M8-Adapter
Technikset - BMW R nineT (mit Serien TFL) MY23 für alle Dayron® (ohne Blinker)
i.NEX - Connector set 121
i.NEX - Connector set 121Vehicle-specific plug & play set for connecting the i.NEX consisting of three adapter cables. The set is suitable for the following motocycle models: BMW R nine T 2018 (rear 3in1 lights)
i.NEX - Connector set 140
i.NEX - Connector set 140 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: CB1000R Neo Sports Café MJ 2018 (front indicator) CB650R Neo Sports Café MJ 2019 (front indicator)
Technikset i - BMW R nineT (mit Serien TFL) MY23
Technikset i - BMW R nineT (mit Serien TFL) MY23 für alle Dayron® I (mit Blinker)
Technicset i - Harley-Davidson Pan America 1250 Special MY21-23
Technicset i - Harley-Davidson Pan America 1250 Special MY23for all Dayron® I (with indicator)