front
Jetstream® The Kellermann Jetstream® is probably the most spectacular motorcycle indicator ever build. The shape is extremely aerodynamic and therefore also at high speeds very streamlined. No other motorcycle indicator with sequential lighting and ECE approval gets even close, the brightness of the Kellermann Jetstream® is unmatched. Especially overtaking becomes safer as the vehicle ahead is strongly warned by the extreme illuminating power, the danger of inadvertently change of lanes is reduced. Recommended accessory: i.SED - Performance | 123.968 ECE-geprüft for front and rear Highest illuminating power Kellermann high power LED technology State-of-art „IC“- chip technology 32 MHz real time micro processor controlled Silent-Current, advanced Power Saving algorithm High measure of visibility across a wide angle range Longlife Protection Guard® Suitable for 12 volt DC applications Flow-optimized metal housing, high quality manufacturing M8 x 20mm thread High-quality vibration-absorbing bearing Global design protection
Be seen but not seen With the BL 2000 bikers can design the handlebar end of their bike in a new way and have a high performance indicator at the same time, making it also an attractive option for sports bikes. Its tinted ring-shaped glass sits unobtrusively in the black metal housing and gives the handlebar a tasteful ending.Although the indicator mounts discreetly on the motorcycle, when in use it shows its true size and will surprise you with its highly noticeable bright flashing. Thias is achieved by the use of the very latest development in Kellermann HighPower LED Technology**. All necessary adapters are supplied for mounting on to most model handlebars.* * Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Ring-shaped glass – spectacularly bright An indicator which is also an elegant complement to your handlebar Indicators visually merge into the bike when not in use Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. Bullet 1000® PL white The Bullet 1000® PL white is an indicator with an integrated position light in the shape of a continuous white light ring. Together with the main light they boost the safety features of the bike.The Bullet 1000® PL white has a unique feature: Once the indicator is activated the position light is temporarily switched off to allow the indictor to be even more visible. Shortly after the indicator stops the position light is activated again. As the Bullet 1000® Extreme so does the Bullet 1000® PL white offer the LED typical fast response** combined with Bullet typical soft response of the inner light section. Alltogether a harmonic indicator performance that blends in with the great overall look and feel of this amazing product. The position lights can be mounted either on the original position light base or connected to the dashboard light of the motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of improved visibility Replaces the existing position light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
"Lights on, Spot® on!" - Special edition with a sporty shape As Kellermann is known for, the Spot® is also super compact and brilliantly bright like no other indicator. This special edition is unusual due to its much sportier shape. With the Spot®, Kellermann's big anniversary party continues: over 30 years of the finest lighting technology on motorbikes - Made in Germany, of course!The shape of the Spot® makes all the difference: Slightly extended in length and a strong base that fits closely to the motorbike. This looks sporty, not only on sports bikes! The Spot® also looks really good on any bike. "Lights on, Spot® on" - the new Spot® makes for a particularly strong appearance!Kellermann Spot® - compact and bright as ever, but sportier!ECE-tested for front and rear EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Jetstream® CL With the Jetstream® CL, Kellermann now offers the world's most spectacular motorcycle indicator with a cruising light. The Jetstream® CL is therefore the first indicator with this function on the accessory market. With the cruising light function, the indicators light up permanently as a position light with amber color. When the indicator is activated, it then takes over the indicator function with the sequential light effect. Two parallelly illuminated position lights visually widen the silhouette of the vehicle, which is particularly helpful for the visibility of the bike for oncoming traffic. The brightness of the Kellermann Jetstream® CL is extreme; no other sequential lighting indicator with ECE approval for motorcycles has achieved these levels of this intensity to date. The indicator function is displayed via a bright and slit-like beam along the entire wing edge. Kellermann thus pushes the upper limit of brightness and ensures maximum added safety on the road.With the new Jetstream® CL, all motorcycles can now be retrofitted with an amber cruising light and indicator function with sequential lighting effect. Motorcycles with a standard cruising light and indicator function can be changed to the Kellermann Jetstream® CL. Highest illuminating power Kellermann high power LED technology State-of-art „IC“- chip technology 32 MHz real time micro processor controlled Silent-Current, advanced Power Saving Algorithm High measure of visibility across a wide angle range Longlife Protection Guard®, IC operated, 330 kHz Flow-optimized metal housing, high quality manufacturingSuitable for 12 volt DC applications With M8 x 20 mm thread High-quality vibration-absorbing bearing European design protection
New, and already a classic The BL 1000 LED is the latest development in handlebar end indicators. Our specially control technology**, the modern high-performance-LEDs and the innovative clear glass look meanperformance as well as beautifully proportioned styling at the end of the handlebar. The BL 1000 LED combines function with handlebar vibration damping. All necessary adapters are supplied for mounting on to most model handlebars*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of brightness and direct response of LEDs Handlebar vibration damping function Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
The ´White´ Light The Atto® WL is the new kid on the block of the highly successful Atto® family and at once the first single position light from Kellermann. The Atto® WL already defined a completely new category of indicators: sensationally small and spectacularly bright. Compact and illuminating power: With this combination the Atto® WL is a real sensation! The light surface of the Atto® WL would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle.In fact, the Atto®WL basically disappears on the motorcycle. The position light shines with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. The Atto® WL offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! Therefore the Atto® WL is enhancing safety on the road. The Atto® WL can be used on multiple applications including quads, cars and trailers (homologated according to ECE-R 6/ R 7). The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology. The complete electronics of the Atto® WL are in the casing, this position light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicator with white position light and indicator with rear and brake light. Bullet 1000® PL The Bullet 1000® PL is an indicator with an integrated position light in the shape of a continuous white light ring. Together with the main light they boost the safety features of the bike. And once the indicator is activated the position lights support the indicator function by flashing in sync. After the indicator has been turned off the position light will resume its function. As the Bullet 1000® Extreme so does the Bullet 1000® PL offer the LED typical fast response** combined with Bullet typical soft response of the inner light section. Alltogether a harmonic indicator performance that blends in with the great overall look and feel of this amazing product. The position lights can be mounted either on the original position light base or connected to the dashboard light of the motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for front ECE regulation for yellow position lights:A position light can send out white or yellow light.In the ECE regulation 52, paragraph 5.13., it is stated:"Colours of the lights: position light can be white or yellow" If yellow light is send out, two position lights have to be installed.Additionally paragraph 6.6.1 states:"Number: two (one for each site), if yellow" Increased safety because of improved visibility Replaces the existing position light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
The extremely bright dashboard indicators! Almost invincible when turned off, but unbeatable in action: Thanks to the mounting position under the handlebars, the new Dash indicators virtually disappear visually at the front of the motorcycle. At the same time, the Kellermann Dash indicators offer maximum brightness with minimum size. This means that the credo of Kellermann's compact indicators now also applies to the new generation of dashboard indicators: "sensationally small - spectacularly bright". The optimized light control of the new Dash family is also achieved by a sophisticated system of lenses and reflectors. The Kellermann HighPower LED** and EXtranz® - Extreme Optical Transparency technology are used here.The complete electronics of the Dash M Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-testedfor front sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
Be seen but not seen With the BL 2000 bikers can design the handlebar end of their bike in a new way and have a high performance indicator at the same time, making it also an attractive option for sports bikes. Its tinted ring-shaped glass sits unobtrusively in the black metal housing and gives the handlebar a tasteful ending.Although the indicator mounts discreetly on the motorcycle, when in use it shows its true size and will surprise you with its highly noticeable bright flashing. Thias is achieved by the use of the very latest development in Kellermann HighPower LED Technology**. All necessary adapters are supplied for mounting on to most model handlebars.* * Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Ring-shaped glass – spectacularly bright An indicator which is also an elegant complement to your handlebar Indicators visually merge into the bike when not in use Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
The extremely bright dashboard indicators! Almost invincible when turned off, but unbeatable in action: Thanks to the mounting position under the handlebars, the new Dash indicators virtually disappear visually at the front of the motorcycle. At the same time, the Kellermann Dash indicators offer maximum brightness with minimum size. This means that the credo of Kellermann's compact indicators now also applies to the new generation of dashboard indicators: "sensationally small - spectacularly bright". The optimized light control of the new Dash family is also achieved by a sophisticated system of lenses and reflectors. The Kellermann HighPower LED** and EXtranz® - Extreme Optical Transparency technology are used here.The complete electronics of the Dash M Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-testedfor front sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
Lighting the way The PL version of our micro 1000® LED indicators comes with additional integrated position lights. With modern high-performance-LEDs and our specially control technology** the micro 1000® PL provide better visibility in road traffic. In addition, they also allow others in traffic to better estimate your speed. Connected about the instrument lighting***, the increased power and crystal clear double look creates the impression of daylight-bright lights. Suitable for all motorcycle models*. * Electrical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction.*** The existing side light must be deactivated. ECE-tested for front Increased safety through improved visibility Replaces the existing position light as well as the indicator Sensational new front look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8 x 20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicator with white position light and indicator with rear and brake light. Bullet 1000® PL The Bullet 1000® PL is an indicator with an integrated position light in the shape of a continuous white light ring. Together with the main light they boost the safety features of the bike. And once the indicator is activated the position lights support the indicator function by flashing in sync. After the indicator has been turned off the position light will resume its function. As the Bullet 1000® Extreme so does the Bullet 1000® PL offer the LED typical fast response** combined with Bullet typical soft response of the inner light section. Alltogether a harmonic indicator performance that blends in with the great overall look and feel of this amazing product. The position lights can be mounted either on the original position light base or connected to the dashboard light of the motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for front ECE regulation for yellow position lights:A position light can send out white or yellow light.In the ECE regulation 52, paragraph 5.13., it is stated:"Colours of the lights: position light can be white or yellow" If yellow light is send out, two position lights have to be installed.Additionally paragraph 6.6.1 states:"Number: two (one for each site), if yellow" Increased safety because of improved visibility Replaces the existing position light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
The ´White´ Light The Atto® WL Dark is the new kid on the block of the highly successful Atto® family and at once the first single position light from Kellermann. The Atto®/Atto® Dark already defined a completely new category of indicators: sensationally small and spectacularly bright. Compact and illuminating power: With this combination the Atto® WL Dark is a real sensation! The light surface of the Atto® WL Dark would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto®WL Dark basically disappears on the motorcycle.The position light shines with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. The Atto® WL Dark offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! Therefore the Atto® WL Dark is enhancing safety on the road.The Atto® WL Dark can be used on multiple applications including quads, cars and trailers (homologated according to ECE-R 6/ R 7).The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology.The complete electronics of the Atto® WL Dark are in the casing, this position light can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
New, and already a classic The BL 1000 LED is the latest development in handlebar end indicators. Our specially control technology**, the modern high-performance-LEDs and the innovative clear glass look meanperformance as well as beautifully proportioned styling at the end of the handlebar. The BL 1000 LED combines function with handlebar vibration damping. All necessary adapters are supplied for mounting on to most model handlebars*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of brightness and direct response of LEDs Handlebar vibration damping function Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
New, and already a classic The BL 1000 LED is the latest development in handlebar end indicators. Our specially control technology**, the modern high-performance-LEDs and the innovative clear glass look meanperformance as well as beautifully proportioned styling at the end of the handlebar. The BL 1000 LED combines function with handlebar vibration damping. All necessary adapters are supplied for mounting on to most model handlebars*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Increased safety because of brightness and direct response of LEDs Handlebar vibration damping function Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
"Lights on, Spot® on!" - Special edition with a sporty shape As Kellermann is known for, the Spot® is also super compact and brilliantly bright like no other indicator. This special edition is unusual due to its much sportier shape. With the Spot®, Kellermann's big anniversary party continues: over 30 years of the finest lighting technology on motorbikes - Made in Germany, of course!The shape of the Spot® makes all the difference: Slightly extended in length and a strong base that fits closely to the motorbike. This looks sporty, not only on sports bikes! The Spot® also looks really good on any bike. "Lights on, Spot® on" - the new Spot® makes for a particularly strong appearance!Kellermann Spot® - compact and bright as ever, but sportier!ECE-tested for front and rear EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Perfectly disguised The BL 1000 Dark brings light into darkness and sets new standards in motorcycle design. Thisinnovative design appears like a seamless extension of the handlebar. The latest highperformance-LEDs and our specially control technology** make for a spectacularly brightindicator signal. The newly proportioned housing shape gives a clear line at the end of the handlebar. The BL 1000 Dark liberates styling from the restraints imposed by conventionally styled front indicators and combines indicating function with handlebar vibration damping. Combined with the micro 1000® Dark it gives a perfect look. All necessary adapters are supplied for mounting on to most model handlebars*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front Strongly tinted glass – spectacularly bright Handlebar vibration damping function Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications
Daytime running lights for motorcycles– Simply explained! All you need to know: The use of daytime running lights for motorcycles is mandatory in many countries to increase road safety through better visibility. Daytime running lights increase visibility during the day, reducing the risk of collisions with other road users. Fog lights - often referred to as "auxiliary lights" - are not daytime running lights and may only be used in poor visibility conditions below 50 meters.read more The smart daytime running light system with intelligent light control and ECE approval!The Kellermann Dayron®i is the world's first high-performance daytime running light for motorcycles with intelligent light control and ECE approval. This innovative daytime running light with maximum light output is unsurpassed on the market. The daytime running light system can be fully integrated into the motorcycle´s on-board electronics, making it the only retrofit daytime running light to offer a complete system solution. Unique: Complete integration of the daytime running light into the on-board electronics via DRL device!With the highest light output of all ECE-approved daytime running lights on the market, the Dayron®i ensures greater motorcycle visibility and therefore reduces the risk of accidents. Thanks to the sensational brightness, every motocycle with Dayron®i daytime running lights is perceived much better by other road users during the day and at dusk. This much light intensity and signalling effect is legally only available from Kellermann!The Dayron® i is the world's first combination of daytime running light and indicator, the entire light surface changes from white to yellow when the indicator is switched on.The Dayron® daytime running light system is installed with the support of motorcycle-specific Plug & Play solutions (ready-to-plug-in connections). The integration into the motorcyce's on-board electronics is done by the DRL Device (Daytime Running Light Module). This intelligent DRL Device controls the perfect coordination and communication of all components with the motorcycle's on-board electronics. The Dayron® daytime running light system also fully complies with the automatic light control between low beam, daytime running light and position light required by law. Auxiliary headlights with other functions can continue to be operated even after the daytime running light system has been installed.ECE approvedExtreme light output - More safety through more visibility Unique brilliant luminous surface with outstanding new lens technologyReplaces the existing daytime running light as well as position light & turn signals on request Automatic deactivation of daytime running light / position light during turn signal operationDRL device: Daytime running light system completely integrated into the onboard electronics Plug&Play installation with model-specific add-on kitsAutomatic switching of daytime running light to position light when low-beam is activatedFlow-optimized aluminium casing Kellermann HighPower LED technologyLong-life Protection Guard®, IC controlled, 330kHzSuitable for 12 Volt DC applications With M8 x 20mm mounting adapterEuropean protected design Video Mounting instructions BMW 1250 GS Video Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Video Mounting instructions BMW R nineT Mounting instructions BMW GS 1250 Mounting instructions Harley-Davidson Pan America 1250/Pan America 1250 Special Mounting instructions BMW R nineT
The extremely bright dashboard indicators! Almost invincible when turned off, but unbeatable in action: Thanks to the mounting position under the handlebars, the new Dash indicators virtually disappear visually at the front of the motorcycle. At the same time, the Kellermann Dash indicators offer maximum brightness with minimum size. This means that the credo of Kellermann's compact indicators now also applies to the new generation of dashboard indicators: "sensationally small - spectacularly bright". The optimized light control of the new Dash family is also achieved by a sophisticated system of lenses and reflectors. The Kellermann HighPower LED** and EXtranz® - Extreme Optical Transparency technology are used here.The complete electronics of the Dash A Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-testedfor front sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection
The extremely bright dashboard indicators! Almost invincible when turned off, but unbeatable in action: Thanks to the mounting position under the handlebars, the new Dash indicators virtually disappear visually at the front of the motorcycle. At the same time, the Kellermann Dash indicators offer maximum brightness with minimum size. This means that the credo of Kellermann's compact indicators now also applies to the new generation of dashboard indicators: "sensationally small - spectacularly bright". The optimized light control of the new Dash family is also achieved by a sophisticated system of lenses and reflectors. The Kellermann HighPower LED** and EXtranz® - Extreme Optical Transparency technology are used here.The complete electronics of the Dash A Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* * Possibly electronic equipment is needed to regulate the flashing rate.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.ECE-testedfor front sensationally small, spectacularly bright EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection