Shop
BMW R 1300 GS Adventure Atto® + Atto® DF Set
BMW R 1300 GS Adventure Atto® + Atto® DF SetComplete set with all necessary parts for mounting and electrical connection of Atto® front and Atto® DF rear on a BMW R 1300 GS Adventure.Contents:2x152.200 Atto® / piece 64.95€2x156.200 Atto® DF / piece 99.95€2x152.751 Mounting plate C-Evo / set 19.95€1x111.100 i.NEX - V12 / piece 89.95€1x111.520 i.NEX - Connector set 120 / set 14.95€1x111.522 i.NEX - Connector set 122 / set 12.95€
micro Rhombus
Corners and edges The Rhombus stands for recognizable, striking design. Its distinct shape creates a unique style. Supplied in a stylish metal housing, the Rhombus has a very wide light beam. An almost unlimited lifespan is guaranteed with our specially control technology**. The Rhombus replaces the front as well as the rear indicators and gives a new look. Suitable for all motorcycle models*. * Electronical accessories may be required to match indicators signal frequency.** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for front and rear Improved safety because of the brightness and direct response of the LED Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 6 and 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Multi-function piece BL 1000 SG
Multi-function piece with Plus- und Minus cable
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
Mounting Plates
Mounting Plates 123.758 used for:KawasakiZ750 Kawasaki Front Umbau Kit front The mounting plates are suitable for all indicators with M8 thread (micro 1000®, Rhombus and Bullet 1000® series).
Content: 2 Piece(s) (€7.98 / 1 Piece(s))
Adapter for other indicators M 10
Adapter for other indicators Sapre parts for KH 1000 With M10 threaded
License plate illumination
License plate illumination Spare parts for KH 1000 series Height: 29 mm Breadth: 54 mm Height: 46 mm
Rigid mounting M8x20mm
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20mm
License plate light W5W (lamp)
License plate light Spare parts for KH 1000, W5W (lamp), E1 license ECE-tested
Earth cable with large nut
Earth Cable for BL 1000 for BL 1000 yellow / BL 1000 white (Halogen) with large nut from 20 mm
Rigid mounting M8x20mm
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20mm
Rigid mounting M8 - M12
Adapter Spare parts for micro and Rhombus series Measure: M8 - M12
i.SED V6
i.SED V6 suitable for vehicles with 5-9 volt indicator application For example when mounting indicators with higher wattage than original indicators with higher voltage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual
Upgrade set KTW 2.0 → KTW 2.5
Upgradeset KTW 2.0 -> KTW 2.5 pin punch 4xx, pin punch 5xx und 6xx, fence, fixing screw, pressure screw
Magnetic positioning device*
Magnet positioning device* *applicable for KTW 2.0 and KTW 2.5
Earth cable with small nut
Earth Cable for BL 1000 for BL 1000 yellow / BL 1000 white (Halogen) with small nut from 16,5 mm
BL 1000 glass (yellow)
BL 1000 glass yellow only for BL 1000 yellow, for front or rear
Rubber adapter set
Rubber adapter set Mounting rubber + nut Type 1 from 11,5 mm
BL 1000 glass (yellow)
BL 1000 glass yellow only for BL 1000 yellow, for front or rear
Replacement set for KTW 2.5
Replacement set for KTW 2.5 for KTW 2.5 pin punch 4xx, pin punch 5xx und 6xx
Rubber adapter set
Rubber adapter set Mounting rubber + nut Type 3 from 20 mm
Rubber adapter set
Rubber adapter set Mounting rubber + nut Type 2 from 16,5 mm