Electronic accessories
i.NEX - Cable set MO
i.NEX - Cable set MOExtension set i.NEX input - 2 x 5-core, 70 cm
i.LOAD - IL 7,5
i.LOAD - IL 7,5 Usage for Kellermann LED turn signal with original 21 watt turn signals - 1 piece per turn signal. When installing new indicators the flashing rate of the indicator or the control light may increase. Load independent relays (e.g. R2) or multifunctional assistance systems (e.g. CR4®) can fix the problem. If the installation is not possible or favored ,an i.LOAD can also fix the problem.
i.NEX V4
Kellermann i.NEX: One for all! All indicators, all motorcyclesNo more conversion stress - i.NEX is the all-rounderThe Kellermann i.NEX now makes converting motorcycle lights as easy as possible.Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.When things need to be simple - the i.NEX puts an end to the despair of the mechanic and incalculable hours of work in the workshop! Motorcycle electronics are becoming more complex every year, making the installation of retrofittable lights increasingly time-consuming and nerve-wracking. It is often not clear which accessories are required for the conversion or what problems can arise during the conversion. The solution: Kellermann i.NEX - the box that can do everything!The i. NEX can be used to connect up to four indicators as well as a rear light, brake light and position light. The i.NEX series also offers connection accessories with matching connector and cable sets. This makes conversion simple and effective.Small effort, big effect - the lights are connected directly to the i. NEX. The i.NEX is set according to the requirements of the on-board electronics using rotary switches. No matter which light, no matter which motorcycle - only the Kellermann i.NEX can do it!Kellermann i.NEX - Always the right choice - error messages in the cockpit, incorrect flashing frequency of indicators and indicator control lights as well as disturbing idle currents are now a thing of the past.In addition, the i.NEX series offers the solution for various requirements, e.g. when fitting indicators with higher power consumption or higher voltage than original as well as original minus-switched indicators.Kellermann i.NEX - Complicated becomes simple!i. NEX at a glance:Electronic universal solution for motorcycle lights such as indicators, rear/brake light and position lightCompatible with classic bikes, new models and modern operating systemsCorrect flashing frequencyNo error messages in the cockpitNo disruptive quiescent currentsInstallation of indicators with higher power consumption [watts] than originalInstallation of indicators with lower power consumption [watts] than originalInstallation on motorcycles with minus-switched indicatorsTechnical information: The i.NEX - V4 is suitable for standard 3-4 volt lights up to 10 watts total power of the functions to be replacedCalculation: Constant lights: Full power / indicators: Half power Example: Tail light 1W + brake light 3W + blinker 3W (1.5W) + blinker 3W (1.5W) = 7W The volts and watts are specified on the lenses of the standard lights. A different product is required in the following cases: 21 watt indicators i.LOAD - IL 7,5 – one piece per indicatorAlternatively: If a manual 2-3 pole indicator relay is fitted to the vehicle as standard (optional) Blinkrelais R1 – one piece per vehicle Blinkrelais R2 – one piece per vehicle 5-9 Volt lights / on-board voltage 12 Volt i.NEX - V8 12 Volt lights / on-board voltage 12 Volti.NEX - V12 A customized solution is required in the following cases: Email to customer service Main headlights, daytime running lights, fog lights US vehicles >12 Volt on-board voltage
i.NEX - Connector set 121
i.NEX - Connector set 121Vehicle-specific plug & play set for connecting the i.NEX consisting of three adapter cables. The set is suitable for the following motocycle models: BMW R nine T 2018 (rear 3in1 lights)
i.NEX - Connector set 140
i.NEX - Connector set 140 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: CB1000R Neo Sports Café MJ 2018 (front indicator) CB650R Neo Sports Café MJ 2019 (front indicator)
i.NEX - Connector set 110
i.NEX - Connector set 110 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Aprilia Tuono V4 1100 Factory MJ 2017 -2019 (front indicators)
i.NEX - Connector set 175
i.NEX - Connector set 175Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: MV Agusta Blinker 800 Brutalle RR MJ 2018
i.NEX - Connector set 191
i.NEX - Connector set 191Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (rear indicators)
i.NEX - Connector set 192
i.NEX - Connector set 192Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug. The set is suitable for the following motocycle models: Yamaha YZF-R1M MJ 2018 (rear 3in1)
i.NEX - Connector set 160
i.NEX - Connector set 160 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Indian Scout Bobber MJ 2018 (front Indicator)
i.NEX - Connector set 110
i.NEX - Connector set 110 Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Aprilia Tuono V4 1100 Factory MJ 2017 -2019 (front indicators)
i.NEX - Connector set 153
i.NEX - Connector set 153Vehicle-specific plug & play set for connecting the i.NEX consisting of two adapter cables with matching plug, 2 extension cables and cable connectors. The set is suitable for the following motocycle models: Harley-Davidson 3indicatorPan AmericaPan America Special
Flasher Relay R2 Typ K
The Classic The load-independent R2 flasher relay is the universal problem solver when using LED and halogen indicators. It replaces all original 2-3 pole flasher relays and delivers a constant and correct flashing frequency. Connection is simple. If following the conversion to LED indicators, the non-activated indicators also flash, then all that is required is for the relay to be connected to a left and a right indicator in order to reliably cure this problem*. With vehicle specific plug, suitable for many Kawasaki models. ECE-tested Replaces the original 2-3 pole flasher relay Restricts the accompanying flashing of non-activated indicators Load-independent / steady flash rate Switching capacity 0,5-85 watt Small dimensions 34x22x12 [mm] (L/W/H) High quality metal housing Suitable for indicator switches Suitable for 12 volt DC applications
i.BOS - EL1
i.BOS - EL1 Serves as a quick fix for inaccurate cockpit displays The i.BOS systems (intelligent boxing operation system) provide a quick fix, if after the installation of the indicator the control light flashes too quick or other control lights in the cockpit function inaccurately. i.BOS - EL1 provides correct function of the hazard light, e.g. when using DF versions. *Additionally and on case by case the option "LED indicator" has to be activated in the software. Required is 1 set for 2 indicators / 2 DF indicators (indicator, rear light, light)
i.NEX - V8 Die elektronische Universallösung für Motorradleuchten mit 5 - 9V!
Kellermann i.NEX: One for all! All indicators, all motorcyclesNo more conversion stress - i.NEX is the all-rounderThe Kellermann i.NEX now makes converting motorcycle lights as easy as possible.Never again be at a loss when looking for the right module - the i.NEX is the electronic universal solution! This connection genius finally brings indicators and motorcycle together in an uncomplicated way.When things need to be simple - the i.NEX puts an end to the despair of the mechanic and incalculable hours of work in the workshop! Motorcycle electronics are becoming more complex every year, making the installation of retrofittable lights increasingly time-consuming and nerve-wracking. It is often not clear which accessories are required for the conversion or what problems can arise during the conversion. The solution: Kellermann i.NEX - the box that can do everything!The i. NEX can be used to connect up to four indicators as well as a rear light, brake light and position light. The i.NEX series also offers connection accessories with matching connector and cable sets. This makes conversion simple and effective.Small effort, big effect - the lights are connected directly to the i. NEX. The i.NEX is set according to the requirements of the on-board electronics using rotary switches. No matter which light, no matter which motorcycle - only the Kellermann i.NEX can do it!Kellermann i.NEX - Always the right choice - error messages in the cockpit, incorrect flashing frequency of indicators and indicator control lights as well as disturbing idle currents are now a thing of the past.In addition, the i.NEX series offers the solution for various requirements, e.g. when fitting indicators with higher power consumption or higher voltage than original as well as original minus-switched indicators.Kellermann i.NEX - Complicated becomes simple!i. NEX at a glance:Electronic universal solution for motorcycle lights such as indicators, rear/brake light and position lightCompatible with classic bikes, new models and modern operating systemsCorrect flashing frequencyNo error messages in the cockpitNo disruptive quiescent currentsInstallation of indicators with higher power consumption [watts] than originalInstallation of indicators with lower power consumption [watts] than originalInstallation on motorcycles with minus-switched indicatorsTechnical information: The i.NEX - V8 is suitable for standard 5-9 volt lights up to 10 watts total power of the functions to be replacedCalculation: Constant lights: Full power / indicators: Half power Example: Tail light 1W + brake light 3W + blinker 3W (1.5W) + blinker 3W (1.5W) = 7W The volts and watts are specified on the lenses of the standard lights. A different product is required in the following cases: 21 watt indicators i.LOAD - IL 7,5 – one piece per indicatorAlternatively: If a manual 2-3 pole indicator relay is fitted to the vehicle as standard (optional) Blinkrelais R1 – one piece per vehicle Blinkrelais R2 – one piece per vehicle 12 Volt lights / on-board voltage 12 Volt i.NEX - V12 3-4 Volt lights / on-board voltage 12 Volti.NEX - V4 A customized solution is required in the following cases: Email to customer service Main headlights, daytime running lights, fog lights US vehicles >12 Volt on-board voltage
i.SED V6
i.SED V6 suitable for vehicles with 5-9 volt indicator application For example when mounting indicators with higher wattage than original indicators with higher voltage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual
i.SED V12
i.SED V12 suitable for vehicles with 12 volt indicator application For example when mounting indicators with higher wattage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual „DF“ products on vehicles where the indicators ground is switched but not the plus as usual