Shop
Multi-function piece BL 1000 SG
Multi-function piece with Plus- und Minus cable
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
Rigid mounting M8x20
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20
Mounting Plates
Mounting Plates 123.758 used for:KawasakiZ750 Kawasaki Front Umbau Kit front The mounting plates are suitable for all indicators with M8 thread (micro 1000®, Rhombus and Bullet 1000® series).
Content: 2 Piece(s) (€7.98 / 1 Piece(s))
Adapter for other indicators M 10
Adapter for other indicators Sapre parts for KH 1000 With M10 threaded
License plate illumination
License plate illumination Spare parts for KH 1000 series Height: 29 mm Breadth: 54 mm Height: 46 mm
Rigid mounting M8x20mm
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20mm
License plate light W5W (lamp)
License plate light Spare parts for KH 1000, W5W (lamp), E1 license ECE-tested
Earth cable with large nut
Earth Cable for BL 1000 for BL 1000 yellow / BL 1000 white (Halogen) with large nut from 20 mm
Rigid mounting M8x20mm
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20mm
Rigid mounting M8 - M12
Adapter Spare parts for micro and Rhombus series Measure: M8 - M12
i.SED V6
i.SED V6 suitable for vehicles with 5-9 volt indicator application For example when mounting indicators with higher wattage than original indicators with higher voltage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual
Upgrade set KTW 2.0 → KTW 2.5
Upgradeset KTW 2.0 -> KTW 2.5 pin punch 4xx, pin punch 5xx und 6xx, fence, fixing screw, pressure screw
Magnetic positioning device*
Magnet positioning device* *applicable for KTW 2.0 and KTW 2.5
Earth cable with small nut
Earth Cable for BL 1000 for BL 1000 yellow / BL 1000 white (Halogen) with small nut from 16,5 mm
BL 1000 glass (yellow)
BL 1000 glass yellow only for BL 1000 yellow, for front or rear
Rubber adapter set
Rubber adapter set Mounting rubber + nut Type 1 from 11,5 mm
BL 1000 glass (yellow)
BL 1000 glass yellow only for BL 1000 yellow, for front or rear
Replacement set for KTW 2.5
Replacement set for KTW 2.5 for KTW 2.5 pin punch 4xx, pin punch 5xx und 6xx
Rubber adapter set
Rubber adapter set Mounting rubber + nut Type 2 from 16,5 mm
Rubber adapter set
Rubber adapter set Mounting rubber + nut Type 3 from 20 mm
Indicator glass micro 1000® evo
Indicators glass evo for micro 1000® Halogen (from 2004)
Rigid mounting M8x20mm
Rigid Mounting Spare parts for micro and Rhombus series M8 x 20mm