micro 1000® LED Dark
€69.95
Available, delivery time: 1-3 days
Product information "micro 1000® LED Dark"
Long lasting
The micro 1000® LED replace the rear as well as the front indicators because of their bright beam. Thanks to our specially control technology** the micro 1000® LED series offers an especially high light output with almost unlimited life span. They are available in either modern clear or in the classic yellow glass versions. Suitable for all motorcycle models*.
* Electronical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs
ECE-tested for front and rear
- Improved safety because of brightness and direct response of the LED
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- High quality metal housing
- Suitable for 6 and 12 volt DC applications
- With M8x20 thread
- Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
| DC on-board power supply: | 12 V |
|---|---|
| ECE-type approval: | Motorcycles |
| Functional features: | Indicator |
| Height: | 17 mm |
| Length (without thread/fastening): | 72 mm |
| Lens colour: | strongly tinted |
| Mounting: | mounted indicator |
| Mounting thread: | M8 x 20 mm |
| Produktlisting-Features: | Indicator |
| Technology: | LED |
| Wide: | 18 mm |
Montagezubehör
Flexible Rubber Adapter Spare parts for micro and Rhombus series M8 x 20
Mounting Plates 123.753 used for:Italian Motorcycles (Ducati, Moto Guzzi, usw.)
Content: 2 Piece(s) (€6.48 / 1 Piece(s))
Adapter Spare parts for micro and Rhombus series Measure: M8 - M12
Silent rubber adapter KH 1000 Spare part for KH 1000 Length: 10 mm, with M8 thread
Elektronisches Zubehör
i.SED V12 suitable for vehicles with 12 volt indicator application For example when mounting indicators with higher wattage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual „DF“ products on vehicles where the indicators ground is switched but not the plus as usual
i.SED V6 suitable for vehicles with 5-9 volt indicator application For example when mounting indicators with higher wattage than original indicators with higher voltage than original indicators on vehicles where the ground is „plus“ but not „minus“ as usual
Posi-Lock cable connector splash water connections. The cable is connection between seconds, without soldering.
Content: 9 Piece(s) (€1.44 / 1 Piece(s))
Posi-Lock cable connector MINI Splash water connections The cable is connection between seconds, without soldering
Content: 5 Piece(s) (€1.99 / 1 Piece(s))