indicator, rear light, brake light
Jetstream® The Kellermann Jetstream® is probably the most spectacular motorcycle indicator ever build. The shape is extremely aerodynamic and therefore also at high speeds very streamlined. No other motorcycle indicator with sequential lighting and ECE approval gets even close, the brightness of the Kellermann Jetstream® is unmatched. In the 3in1 version the equally strong rear and brake lights are added, the well-proven Atto® technology is placed in the jet engine channel. Recommended accessory: i.SED - Performance | 123.968 ECE-geprüft for front and rear Highest illuminating power Kellermann high power LED technology State-of-art „IC“- chip technology 32 MHz real time micro processor controlled Silent-Current, advanced Power Saving algorithm High measure of visibility across a wide angle range Longlife Protection Guard® Suitable for 12 volt DC applications Flow-optimized metal housing, high quality manufacturing M8 x 20mm thread High-quality vibration-absorbing bearing Global design protection
A talented edge Our innovative indicator-brake-rear light combination maximizes your individual styling option at the rear of your bike! Optically fully disguised due to its reduction in size and an all-rounder at the same time: The original tail light can be eliminated and replaced by beaming double rear lights based on high-performance LEDs and the Kellermann HighPower LED Technology.** Inconspicuous at rest, unbeatable in action: The brake light of the Rhombus S DF Dark warns with an intensity that is second to none. It keeps the following traffic at distance, thus enhancing safety on the road. As the complete electronics are in the casing the Rhombus S DF Dark allows for a significant reduction in weight. Suitable for all motorcycle models.* * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5 x 0,5 x 6,5 mm thread European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
A talented edge Our innovative indicator-brake-rear light combination maximizes your individual styling option at the rear of your bike! Optically fully disguised due to its reduction in size and an all-rounder at the same time: The original tail light can be eliminated and replaced by beaming double rear lights based on high-performance LEDs and the Kellermann HighPower LED Technology.** Inconspicuous at rest, unbeatable in action: The brake light of the Rhombus S DF Dark warns with an intensity that is second to none. It keeps the following traffic at distance, thus enhancing safety on the road. As the complete electronics are in the casing the Rhombus S DF Dark allows for a significant reduction in weight. Suitable for all motorcycle models.* * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5 x 0,5 x 6,5 mm thread European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
A sensational all-rounder A 3in1 sensation as it hasn’t been seen before: The Atto® DF is the latest and by far most spectacular member of Kellermann’s successful Atto® series! The probably world’s smallest street legal indicator is now available in triple function with an integrated rear and brake light. Behind the extremely small yet sensationally bright Atto® DF lays a multifunctional all-rounder: At the rear it is visually almost completely disguised with a light surface, which would fit four times on a 1 Cent coin! In result the rear of the motorcycle can be designed as clean and individual as never before. However, in action the Atto® DF shines with an intensity which has made Kellermann products legendary – it’s not the size but the illumination power that counts. Indicators, rear and brake light warn with an uncompromising intensity, clearly signalling the following traffic to keep its distance. Kellermann’s well-known HighPower LED technology** and EXtranz® - Extreme Optical Transparency Technology manage an optimized light channelling through a smart system of lenses and reflectors and thus enabling this combination of sensational brilliance and minimal size. The Atto® DF can be combined with various other series e.g. Atto® or Bullet 1000®. As the complete electronics are in the casing the Atto® DF allows for a significant reduction in weight. * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear replaces the existing rear / brake light as well as indicators sensational new rear look EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
"Lights on, Spot® on!" - Special edition with a sporty shape As Kellermann is known for, the Spot® is also super compact and brilliantly bright like no other indicator. This special edition is unusual due to its much sportier shape. With the Spot®, Kellermann's big anniversary party continues: over 30 years of the finest lighting technology on motorbikes - Made in Germany, of course!The shape of the Spot® makes all the difference: Slightly extended in length and a strong base that fits closely to the motorbike. This looks sporty, not only on sports bikes! The Spot® also looks really good on any bike. "Lights on, Spot® on" - the new Spot® makes for a particularly strong appearance!Kellermann Spot® - compact and bright as ever, but sportier!ECE-tested for rear EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Simply Triple Our innovative indicator-brake-rear light combination in the stylish micro 1000® housing makes it possible to take a new direction when individualizing the rear of your bike. The original tail light can be eliminated. The micro 1000® DF Dark are made to the highest standards of quality and are now available with the option of clear or dark tinted lenses. The characteristically bright double rear lights of the micro 1000® DF Dark sets new standards. Using our tried and tested Kellermann HighPower LED Technology** coupled with its compact housing translates to an extremely lightweight unit. Suitable for all motorcycle models*. * Electronical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Clean Look The Atto® DF Integral is the first built-in version from Kellermann, it can be fully integrated into the fairing or other components. The slim casing almost fully disappears and gives the desired ‘clean look’ when it comes to customizing. Behind the extremely small yet sensationally bright Atto® DF Integral lays a multifunctional all-rounder: At the rear it is visually almost completely disguised with a light surface, which would fit four times on a 1 Cent coin! In result the rear of the motorcycle can be designed as clean and individual as never before. However, in action the Atto® DF Integral shines with an intensity which has made Kellermann products legendary – it’s not the size but the illumination power that counts. Indicators, rear and brake light warn with an uncompromising intensity, clearly signalling the following traffic to keep its distance.Kellermann’s well-known HighPower LED technology** and EXtranz® - Extreme Optical Transparency Technology manage an optimized light channelling through a smart system of lenses and reflectors and thus enabling this combination of sensational brilliance and minimal size. The Atto® DF Integral can be combined with various other series e.g. Atto® or Bullet 1000®.The complete electronics of the Atto® DF Integral are in the casing, this Atto® DF Integral can be plugged into the 12 volt net directly.* In order to protect the Atto© DF Integral from a possible thermal overload, a heat sink in the form of an optionally screw-on ribbed housing is provided. Dimensions heat sink approx.: 24.5x8.9 mm * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear Completely new styling options Replaces the existing rear / brake light as well as indicators Sensational new rear look EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications European design protection With M5 x 0,5 x 6,5 mm fastening screw
Classic meets Hightech The Bullet 1000® was created with a clear goal: An indicator with the classic bullet look and a classy Kellermann design, but equipped with modern LED technology. A newly developed light technology (Kellermann-HPT®) creates a homogenous ring of light. Design quality is not only a question of shape and surfaces but also a result of the complete look and feel when the lights are on. The high quality metal housing with a maximum diameter of 39 mm is like a jewel on the motorcycle. It is available in chrome, black and matte chrome. The Bullet 1000® works with any sophisticated bike design. The Bullet 1000® comes in four different technical versions: Extreme indicator, indicator with yellow position light, indicators with white position light and indicator with rear and brake light. Bullet 1000 DF The Bullet 1000® DF is a rear indicator in combination with a rear and brake light function. It replaces the existing indicators, brake and rear light. The light of the continuously glowing red rings give the tail of the motorcycle a spectacular look**. When breaking, the light circle of the brake light shines strong and clear, the clear message to the following traffic is: Keep your distance. The Bullet 1000® DF at the tail and the Bullet 1000® PL, Bullet 1000® PL white or Bullet 1000® Extreme in the front are the perfect combination for your motorcycle.* * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Special flashing effect Unique and homogeneous light ring Extreme light power HPT®- Homogenous Projection Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8 x 20 fastening screw European design protection
A sensational all-rounder A 3in1 sensation as it hasn’t been seen before: The Atto® DF is the latest and by far most spectacular member of Kellermann’s successful Atto® series! The probably world’s smallest street legal indicator is now available in triple function with an integrated rear and brake light. Behind the extremely small yet sensationally bright Atto® DF lays a multifunctional all-rounder: At the rear it is visually almost completely disguised with a light surface, which would fit four times on a 1 Cent coin! In result the rear of the motorcycle can be designed as clean and individual as never before. However, in action the Atto® DF shines with an intensity which has made Kellermann products legendary – it’s not the size but the illumination power that counts. Indicators, rear and brake light warn with an uncompromising intensity, clearly signalling the following traffic to keep its distance. Kellermann’s well-known HighPower LED technology** and EXtranz® - Extreme Optical Transparency Technology manage an optimized light channelling through a smart system of lenses and reflectors and thus enabling this combination of sensational brilliance and minimal size. The Atto® DF can be combined with various other series e.g. Atto® or Bullet 1000®. As the complete electronics are in the casing the Atto® DF allows for a significant reduction in weight. * Possibly electronic equipment is needed to regulate the flashing rate. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear replaces the existing rear / brake light as well as indicators sensational new rear look EXtranz® - Extreme Optical Transparency Technology Kellermann HighPower LED Technology Longlife Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M5x0,5x6,5 fastening screw European design protection Please note the extensive electronic equipmenthttps://www.kellermann-online.com/en/products/accessories-for-indicators/accessories-atto/
Simply triple Our innovative indicator-brake-rear light combination in our distinctive micro Rhombus housing offers new styling options for the rear of your bike. The original tail light can be eliminated. Made to the highest standards of quality, the micro Rhombus DF are now available with the option of clear or dark tinted lenses. With its characteristically bright double rear lights the micro Rhombus DF are the latest trend in indicator design. Kellermann HighPower LED Technology** coupled with its compact housing translates to an extremely lightweight unit. Suitable for all motorcycle models*. * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism
Simply triple Our innovative indicator-brake-rear light combination in our distinctive micro Rhombus housing offers new styling options for the rear of your bike. The original tail light can be eliminated. Made to the highest standards of quality, the micro Rhombus DF are now available with the option of clear or dark tinted lenses. With its characteristically bright double rear lights the micro Rhombus DF are the latest trend in indicator design. Kellermann HighPower LED Technology** coupled with its compact housing translates to an extremely lightweight unit. Suitable for all motorcycle models*. * Electrical accessories may be required to match indicators signal frequency. ** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction. ECE-tested for rear Replaces the existing brake/rear light as well as the indicator Sensational new rear look Kellermann HighPower LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 volt DC applications With M8x20 thread Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism